WinXP system notebook has connected to the wireless network but can not access the Internet how to do?

Today, many laptop users choose to connect to the wireless network to access the Internet. This connection method brings convenience and brings some trouble to some users, that is, the notebook cannot wirelessly access the Internet. Although it has been confirmed that the wireless network is connected and the signal strength is strong, it is impossible to access the Internet. This article will introduce you to several ways to solve the problem that notebooks can't wirelessly access the Internet.

In the case of this problem, the user will carry out the following basic solutions:

1. Restart the computer;

2. Restart the wireless network;

3, query the network for arrears.

Don't underestimate these three basic operations. Many users are just as simple as solving the problem. In addition, we will consider the following methods:

Answer one, maybe the router The pppoe is not set, which is the account and password you use to access the Internet. If it can be used before, you have not moved the route, there are the following possibilities: 1, the route is powered off or restarted; 2, change the port test; 3, the network fee is expired!

Answer 2, try to plug in the network cable directly, confirm the network is smooth; try to use the wired connection to access the Internet, if not, the router may not be set correctly; enter the router, look at the wireless settings; no problems are found above , soft start router (router initialization), reset the router!

Answer three, if it is WinXP system, and the connection is an infinite router, this problem is mostly caused by the WLAN port setting error of the infinite router. Change the wlan port setting. Win7 operating system will display a yellow exclamation point on the unlimited network connection, indicating that there is no internet connection. Similarly, most of the infinite routers wlan port setting error. If you are connecting to a wireless network provided by an operator such as China Unicom Telecom, you need to apply for an account at the operator, and you need to pay.

Answer four, first, enter the wireless routing settings page, set the wizard - PPPOE dialing mode - enter your online account password - complete; wireless settings - turn on the wireless; wireless settings - wireless security settings - set your wireless Encryption method and wireless password; device management - restart the router!

Answer five, enter 192.168.0.1 in the IE address; then enter the account password (the default seems to be ADMIN, please check the manual) login to the router background management; set the Internet access mode PPPOE and then enter your broadband account password and then determine. Then set up the wireless network to add a name to the wireless network (the default is the router name) encryption method, if you do not understand, choose no encryption, and finally restart the router. Re-link the wireless network; then check the wireless network connection status, where the IP address DNS is successfully obtained, if successful, it will be able to link to the network.

Answer six,

1. Restart the wireless router

Generally, when setting up the wireless router, we will choose to automatically assign an IP address. Sometimes the wireless network does not respond because the remote server assigns an IP address that is not timely. In this case, restarting the wireless router will regain the new IP address and return to normal. Or you can disconnect your laptop from the wireless router and wait a few seconds before reconnecting. These two methods can solve many broken network faults and are very practical.

2, automatically repair the wireless network

The operating system provides the function of automatically repairing the network, which can be used to repair the wireless network when there is a problem with the wireless network. Open “Control Panel“ Network Sharing Center", click on the left side of the window, "Diagnostics and Repair", the system will automatically repair the wireless network, suitable for the primary users who are not familiar with the network settings. Turn on the signal dead angle. Sometimes when we move the laptop back to the bedroom, we will find that the signal strength suddenly drops, the speed of the net is the same as the snail, and even worse, there is no signal at all. This shows that we are in a location where the signal is blind or dead, and the location of the wireless router should be adjusted in time so that its signal can cover all areas of the room.

If the user can't access the wireless Internet, he can try to solve the problem by using the above method. Of course, the user can also restore the wireless router to the factory settings. Because different routers have different operation methods, they are restored. The factory-set operation user can query the relevant product manual, and only need to reset it after restoring the factory settings.