A:GHOSTERR.TXT error occurred during GHOST operation?

This is the Ghost software to copy and write data in the process of reading and writing errors, a dialog box pops up, the purpose is to save the error message to the A disk. Since it is a read and write error, generally appears A:\\ GHOSTERR.TXT error has the following conditions:

1.ISO file is correct or ISO download is incomplete, no matter what way to download must check MD5 code

2. CD quality: due to purchase CD or disc quality problems cause recovery failure

3. Optical drive quality: recovery failure due to decreased optical disk head aging reading capacity

4. Recorder: Because the recorder Burning quality is not good or aging leads to problems with the quality of the disc being burned and causing recovery failure

5.How to burn: The disc is not easy to read due to the fast burning speed. It is recommended to select 16X/24X speed for burning when burning.

6.Super-engraving: Recovery failure due to incomplete data due to exceeding the capacity of the disc, generally suitable for 680M

7. Hard disk has bad sectors: GHOST due to bad sectors Unable to write

8. Hard disk problem: Completely format the C drive, do not Q (Example: format c:)

9. Hard disk does not have a drive letter: Recovery failure due to loss of partition table caused by virus or other

10. Overclocking: Due to overclocking instability Recovery failure

If you eliminate the above problem and still read the disk error, it may be other hardware problems. A complete hardware system consists of many components, they are an organic whole. If the quality of a key component is not Stable, the whole machine will run unstable. Running Ghost in such a system will naturally go wrong. According to experience, you should first suspect memory, try to replace the memory. Double memory compatibility. Second, check the motherboard, hard disk ( And its data line), and then pay attention to whether the CPU's heat is normal. Since everyone has their own experience and methods, here only point to the end.

Many brands have this problem on the main partition Before hiding a manufacturer-installed partition for the whole system detection, you should pay attention to this problem when performing GHOST on the brand machine.