How to solve the problem of WinXP boot blue screen error code 0x00000024?

I believe that everyone has encountered problems with the blue screen of the computer booting. The computer has been used for a long time, and the hardware inside the computer must have some broken. It is normal to have some faults. Recently, there are users who use WinXP system. When his computer is turned on, he encounters the blue screen with error code: 0x00000024. How to do? How to solve this problem with how to solve it? Now let me talk about how to solve the problem of WinXP boot blue screen error code 0x00000024

The specific steps are as follows:

1. Install U disk PE.

Find a non-used u disk and install the PE system on the U disk.

2, BIOS settings u disk priority start.

Set the boot sequence in the BIOS of the computer, and turn the U disk to the first one, so that you can enter the PE system.

When entering the U disk system, you can choose to enter WinPE. I chose the first one.

3. Run the command.

Under WinPE, press Win+R, run cmd, and enter the command “chkdsk c:/f”, the command may take a long time. I have more than 130,000 files on this computer disk. After running for nearly 2 hours, you have to wait patiently for more files.

4. Wait for the end of the run.

Wait for the command to finish running. After the end, pull out the USB flash drive and restart the computer.

At this time, the system enters the system, and the disk needs to be self-tested. After the self-test is completed, the system can be entered.

How to solve the problem of WinXP boot blue screen error code 0x00000024 will be introduced to you here. If you have any problems with this type of problem, you can follow the above steps. The next time I encounter a blue screen problem, I know how to solve it.