WinXP set up WiFi hotspot method

With the advent of the network information age, more and more people are now able to use the network, and wireless network (referred to as WiFi) is one of the important ways for people to access the Internet, so Setting up WiFi hotspots is also a requirement for many users. And many laptops, as well as mobile phones, have their own WiFi capabilities. How does the WinXP system set up WiFi hotspots? What is the method for setting up a WiFi hotspot? Let me talk about the way WinXP sets up WiFi hotspots.

The setting method is as follows:

First, the WiFi hotspot setting on the computer side

1. Make sure your notebook can access the Internet, your notebook with WiFi function, open the notebook WiFi! 1. View the local connection details (this connection is the connection for your laptop Internet access, some friends are dial-up, some friends are USB cats) Find your network connection in the lower right corner of the computer, right click on the connection and click "Status" & mdash; —“Support”.

2. Click on “Details”, as shown below. And record it!

3, open the properties of the local link, modify the IP address, enter the information just recorded into the open Internet Protocol (TCP /IP) properties, you must use a fixed IP! Input information includes IP address, gateway and other information!

4. Set up sharing, or in the properties of this link, click “Advanced”. Check "Allow ……”, the local connection is set. If you share it successfully, the wireless connection will automatically get the IP address and other data in your wireless connection properties.

5. If you find that the wireless connection has not changed, you can manually modify it.

Second, WiFi hotspot wireless connection settings:

1, open the wireless connection properties, select "wireless network configuration"

2, click the add button, appears As shown in the figure below, the network name is named by itself (must be in English) and you do not need to set your own password! But for network security, it is still safe to set a password. Note: The following "This is a temporary network from computer to computer", this check must be selected! I have checked it, it is gray.

3, through the above settings, we can use your mobile phone to search for your WiFi signal, if you can not find, see the following settings:

4, in the network connection, the file — — Network Installation Wizard. If the following picture appears, we check the ignore. Click Next

5, here choose which network you connect to, according to your own situation!

6. Select your wireless network card here, click Next, the next one will be called set computer description and name. Fill in the next step and set a workgroup name to set the next step and then select “ close the file and printer & rdquo; click Next

7, select the map as shown, click Next.

8, to the computer side WiFi hotspot wireless connection settings are completed! In the absence of an accident, open the WiFi function in the WiFi-enabled mobile phone, you can search for the wireless WiFi hotspot we just created!

9. If you connect to WiFi but can't access the Internet, please configure your mobile phone IP address manually!

Third, configure the WiFi hotspot on the mobile phone:

1. Fill in the IP address with the IP address of the same IP segment in your computer. The computer wireless connection IP address is: 192.168.80.1 then my phone can be 192.168.80.X.

2, sub-mask: 255.255.255.0.

3, DNS and router fill in the IP address of your computer's wireless network, for example, I should fill in 192.168.80.1.

The above is the way Xiaobian introduces WinXP to set up WiFi hotspots. If you still don't know how to set up a WiFi hotspot, you can refer to the above method! Whether it is a mobile phone or a computer, you can set up a WiFi hotspot! Let's try it! For more details, please refer to: WiFi Hotspot Settings Tips Sharing under XP System