What should I do if the WinXP computer broadband connection is slow? How to solve?

Broadband is almost a must for every computer. It can help us to browse the web, chat, etc., but sometimes it will also have problems. Many users report that they often encounter slow broadband connections. There are many reasons for this. What if you have a slow connection to a WinXP computer? If you don't understand, let's take a look at the solution for Xiaobian.

Steps/Methods:

1. Click the “Start” menu, click the “Run” command, and type the “Msconfig” option in the “Open” box. , click the “OK” button.

2, open & ldquo; System Configuration Utility & rdquo; window, switch to & ldquo; start & rdquo; tab.

3, in addition to retain & ldquo; Ctfmon & rdquo; start outside the project (this project is the process system input method of the project, if this project will result in removing the phenomenon of input method can not boot), the rest of the Remove all checkboxes, click the “OK" button, and the dialog box that pops up "You must restart your computer for some changes made by the system configuration to take effect", click “ Restart & rdquo; button (Note: users with special needs, please keep the corresponding startup project according to your needs).

4, and then click the lower left corner of the & ldquo; start & rdquo; button, out of the window, click on the right side of the menu & ldquo; Control Panel & rdquo; entry.

5, found in the open control window & ldquo; Fi & rdquo; item, double-click.

6, right click & ldquo; & rdquo ;, Local Area Connection pull down menu Click & ldquo; Properties & rdquo; command.

7, enter & ldquo; Local Area Connection Properties & rdquo; interface, & ldquo; regular & rdquo; This connection uses the following items list, double-click & ldquo under the tab; Internet Protocol (TCP /IP) & rdquo; .

8, open & ldquo; Internet Protocol (TCP /IP) & rdquo; attribute window, & ldquo; conventional & rdquo; screen, select & ldquo; Use the following IP address & rdquo ;, IP address and subnet In the mask box, enter “192.168.0.1” and “255.255.255.0” (you can also fill in the corresponding data provided by the local network operator), click “OK"

WinXP computer slow broadband connection solution will stop here, the method is very simple, only you need to set the IP address and subnet mask on it.