The reason and solution for the white screen after WinXP enters the welcome interface

After WinXP enters the welcome interface, there is a white screen, and nothing is there. What is going on? I believe many users will have a headache when they encounter this situation. I have seen the system appear black screen blue screen, but white screen It is very rare, and there is no way to solve the problem. In fact, you don't have to worry about it. Your WinXP is normal before entering the welcome interface, and the instructions can still be saved.

1, the hardware reasons.

When I encounter WinXP white screen, I first think of hardware problems. I need to check the hardware, re-plug the memory, and check if there are any bad sectors on the hard disk. If there are bad sectors, I need to take it for repair. .

2, system reasons.

You can enter safe mode, move important content to other disks, and directly choose to restore or reinstall the system.

3, the cause of poisoning.

Poisoning is a good solution. After entering the safe mode, you can check the virus.

4, the reason for the drive.

WinXP white screen may be a problem with your graphics card installation or update an incompatible graphics driver. You can use the driver wizard, or remove the graphics driver in safe mode, and then re-install it in the system.

The white screen that appears when WinXP enters the welcome screen is usually caused by the above 4 points. As long as we check one by one and solve it with the corresponding method, this problem is no longer a problem.