Experts analyze common faults and solutions for recorders

As prices continue to fall, recorders have been purchased by more and more users. However, in the process of using, people often encounter some problems. Below, we will analyze the causes and solutions for these common faults, and hope to help everyone.

Common fault one: successful use of analog burning, the actual burning failed

The difference between the "simulated burning" provided by the recorder and the "burning" command is whether to shoot the laser beam. The other operations are exactly the same, that is, "simulation burn" can test whether the source CD is normal, whether the hard disk speed is fast enough, whether the remaining disk space is enough, etc., but can not test the burning environment. Is there a problem with the disc and whether the laser head power of the recorder matches the disc and so on. In view of this, the description "simulated burning" is successful, but the real burning fails, indicating that the compatibility between the recorder and the blank disc is not very good, you can use the following two methods to re-test:

1. Reduce the writing speed of the recorder, it is recommended to be 2X or less;

2. Please replace the blank disc of another brand for burning. Another reason for this phenomenon is caused by the power attenuation of the laser head. If the same brand of disc recording is used, it is normal in the previous period, it is likely to be related to the head power attenuation, you can send relevant Manufacturer maintenance.

Common fault two: unable to copy game CD

Some large commercial software or game software, in the process of production, protect the disc of the disc, so in the process of disc copying In the case that there is an error that cannot be copied, resulting in an error in the burning process or not working properly after copying.

Common fault 3: Burned CD music can't play normally

Not all audio equipment can read CD-R discs normally, most CD players can't read normally The content of the CD-RW disc, so it is best not to use a recorder to burn CD music. In addition, it should also be noted that the recorded CD music must conform to the CD-DA file format.

Common Fault 4: Burning failure often occurs during CD burning.

To improve the burning success rate, you need to keep the system environment simple, that is, turn off the background resident program. It is best to prepare a burning system. A dedicated hard drive for installing software related to burning. In the burning process, it is best to save the data in the hard disk first, make it into an "ISO image file", and then engrave the disc. In order to ensure the smooth flow of data during the burning process, it is necessary to regularly defragment the hard disk to avoid the interruption of the recording due to the failure of the file to be transmitted normally. You can execute the “Disk Scanner” and “Disk Defragmenter” by performing “Disk Scanner”. To organize the hard disk. In addition, do not run other programs during the burning process, even the mouse and keyboard should not be easily touched. It is best not to connect to other computers for burning. In the process of burning, if the system administrator sends information to the machine, it will affect the recording effect. In addition, in the LAN, do not use resource sharing, if in the process of burning, other The user reads the local hard disk, which will cause the recording work to be interrupted or failed. In addition, pay attention to the heat dissipation problem of the recorder. Good heat dissipation conditions will give the recorder a stable working environment. If the burner is too hot due to continuous burning, you can turn off the computer first, and then continue after the temperature is lowered. Burn. For built-in burners, it is best to add an extra cooling fan to the chassis. The external recorder should pay attention to dust and moisture, so as not to cause the laser head to read and write abnormally. Previous12Next page Total 2 pages