HDMI external output settings under Windows XP system

Problem Description How
user to inquire ideapad Y330A

external HDMI settings Analysis
ideapad Y330A
Windows XP sp3 Professional
Note:

off operation is recommended

solution

display apparatus using the HDMI cable is connected and Y330A

Switch the external display device to the display mode of the HDMI interface after connecting

Open the ATI console and the welcome setting interface (Figure 1), select Advanced, Next.

view of a

4, notification click & ldquo; is & rdquo; (Figure II)

Figure 2

5. Enter the ATI Catalyst Control Center to see that the HDMI external display has been detected (disabled) ( Figure III)

FIG three

6, click the dimmed display 2 (Figure 4), the pop-up enabled device prompts to select & ldquo ; is ”. (Figure 5)

FIG four

FIG five

7, appear at this time external display device display screen, ATI Catalyst Control Center selected application prompted to select & ldquo; is & rdquo; (Figure VI)

Figure VI

8. Adjust the display mode as shown in Figure 7. Right click on the enabled external device to select the corresponding mode. (Figure 7)

FIG seven

9, directly after the connection is automatically switched to the audio output HDMI output. (Figure 8)

figure VIII

10, if required using a laptop with an external device to watch 1080P high-definition video, advise users to adjust The display mode is “Standard stretch desktop” (Fig. 9). Selecting monitor 2 to adjust the resolution to 1920*1080 can realize the perfect point-to-point display of 1080P for external devices. (Figure X)

FIG nine

FIG ten