Solve the problem of unable to shut down

1. Click &start; set → control panel → power options → advanced power management & rdquo;, if your machine supports advanced power management features, then select “ enable advanced power management support & rdquo;;

2. Click “Start” and run “regedit”, then find PowerdownAfterShutdown in HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\WindowsNT\\CurrentVersion\\Winlogon and set the value to 1;

3. Restart will succeed.

Note: If your machine does not support advanced power management, it is unfortunate that you can only manually shut down the power when you turn off the system and display "When you can safely shut down."

Another: Magic method to solve Win98/Me can not shut down

Win 98 and Win Me have such a problem: When the system is used for a period of time, the system will stay in the system when it is closed; now you can Normally shut down the system. This screen can only be turned off by manually pressing the Power button on the chassis. Regarding this issue, many newspapers have provided related solutions, which are summarized as follows: install Microsoft's shutdown patch, check whether the advanced power option is turned on, and check whether the shutdown sound file is damaged. However, the author has repeatedly proved that these methods do not necessarily work when this happens.

The original solution of the author is to use Ghost to restore the system. Later, I found out the following method, which is simple and practical.

1. Create a new text file and rename it to “win386.swp”. In the next operation, you need to replace the system generated “win386.swp” file with this 0-byte "win386.swp" file.

2. Press “Start →Run", enter “sfc”Run“System File Checker" Extract a file & rdquo; option, press the "Browse" button, select the newly created "win386.swp" file, press the "Start" button, the "File Extraction" dialog box will appear. “Restore from “ where you enter the directory where the file is located, such as “C:\\”, or click on the right side of the "Browse" to select; in “ save the file to ” Enter ""system drive\\windows” directly (also press the "Browse" button on the right side); after filling in both places, press the "OK" button to start the new "“ The win386.swp” file replaces the system's own "win386.swp" file. In this process, you will see the prompt to back up the original win386.swp file, press the “Skip” button. Finally, when the dialog box asking to restart the machine pops up, press “ is ”, after restarting the computer, it can be shut down normally.

If the fault is not eliminated after following the above method, please first eliminate the damage of the shutdown sound file and so on. If it still can't be solved, please press the “F8” button at boot time, select “Safe Mode” in the boot menu, and then restart the system.

In fact, if you are a good friend of DOS, you can also delete the "win386.swp" file in pure DOS. That is, when the system is shut down, select "Restart the system and switch to MS-DOS mode", switch the system to pure DOS mode, then go to the "windows" directory, execute "ld win386.swp", and finally restart The computer can be.