Windows home (www.Windowszj.com): As we all know, Win7 operating system is an upgraded version of the xp system, there are many people using the win 7 operating system. But it is undeniable that many people still use the xp system, whether it is out of habit, or because of old age, or other reasons. Want to change back to XP operating system, or want to know how to use u disk to install xp system, you can refer to this article: how to use U disk to install radish home Ghost xp sp3 system.
Pre-preparation:
1. U disk with a capacity of not less than 2G.
The image files of the XP system are relatively small, 1G up and down, so the capacity of the U disk is not large.
2. XP image file → Here is an image file named WINXPSP3.GHO.
PS: The image of Xiaobian here is the home of the radish home of Windows Home Ghost xp sp3 professional installed version 2013.03, the WINXPSP3.GHO image file obtained after decompression. More xp system download
3. Pocket PE U disk boot disk creation tool, recommended download address: http://www.koudaipe.com
4.BiOS set U disk as the first boot disk.
System installation steps:
1. Make U disk boot disk, the specific production steps can refer to the U disk boot process in the U disk installed new radish home Win7 Ultimate system diagram.
2. Insert the prepared USB flash drive into the USB port of the computer and restart the computer.
3. Enter BiOS, set the U disk as the first boot disk, save and exit to automatically restart the computer.
4. After the computer restarts, it enters the pocket PE U disk system tool startup interface. Choose to select the second item "Start Pocket U disk Window8PE Maintenance System", (of course, you can choose the appropriate one according to your own preferences) as shown in Figure 1:
Figure 1
5. Window8PE starts up The interface, as shown in Figure 2:
Figure 2
6. After waiting a few seconds, enter the Window8PE maintenance system interface, double-click to open the "pocket Ghost" icon on the desktop, as shown in Figure 3: Br>
Figure 3
7. In the interface that appears, confirm the Ghost image file path (default, of course, the last slash is WINXPSP3.GHO) → click "OK", as shown in Figure 4. Show:
Figure 4
8. Click "Yes" in the prompt interface that appears, as shown in Figure 5:
Figure 5
9. Ghost32 11.0 process indicator appears Interface to view the progress of the automatic restore operation. As shown in Figure 6:
Figure 6
10. Enter the prompt interface of "Restore completed, automatically restart the computer after 10 seconds", the default wait or select "Yes", as shown in Figure 7. :
Figure 7
11. The next step is the automatic system installation. Under normal circumstances, you can complete the system installation after waiting. The following is a typical picture, as shown in Figure 8:
Figure 8
12. When the interface shown in Figure 9 appears, it shows that the installation of Ghost xp sp3 is completed.
图9
Are you still using U disk, CD reloading system? Now launch a good computer reloading system software - system home reload master, perfect support xp, win7 32-bit, Win7 64-bit, Win8 system converts each other, and the multi-system is simpler and more convenient. The whole process is fully automatic, no need to guard, the whole operation process is simple and efficient, no need for any technology.