When we use Ghost, if an error occurs, Ghost will return an error code to the user, but many people do not know what the feedback code means. Now the system home Xiaobian lists them one by one for your reference, hoping to help everyone. Error code: 10000 Cause or countermeasure: Incorrect path/file syntax. Make sure the path and file name are correct and make sure you have write access if you are creating an image file on the network. Error code: 10001 Cause or countermeasure: The user gave up the operation. Error code: 10060 Cause or countermeasure: A bad source file or disk was read. Check the disk or image file for any problems, if there is any conflict in the network, and if there is a problem with the CD-ROM drive. Error code: 10082 Cause or countermeasure: The shared version of Ghost has expired and must be purchased before it can be used. Error code: 10170 Cause or countermeasure: Refuse to check the image file or disk. Please use the updated version to resolve this issue. Error code: 10180 Cause or countermeasure: The hard disk is not responding. Check the cable, power connections, jumpers, and basic input/output unit (BIOS) settings. Make sure your system has been properly partitioned by FDISK. Error code: 10210 Cause or countermeasure: Invalid extended partition information, maybe your hard disk partition has been compressed by hard disk compression software. If they are controlled by this type of drive, Ghost cannot completely locate the hard drive. Please unzip the partition before executing the Ghost program. Error code: 10220 Cause or countermeasure: This error code is returned because you are running the Ghost program under the Windows DOS window. Please try to use Ghost under pure DOS, it is best to start the machine with DOS disk, and then execute the Ghost program. Error code: 10600 Cause or countermeasure: Ghost could not continue properly due to lack of memory, please see the 15040 error code below. Error code: 11000 Cause or countermeasure: Invalid backup image file, please re-specify the backup image file. Error code: 12080 Cause or countermeasure: Generally it is caused by attempting to clone a disk to disk on the network. Ghost can only perform disk-to-disk cloning on the network via the NetBIOS protocol. Error code: 12090 Cause or countermeasure: An error occurred while reading or writing to the hard disk. Please try to scan the hard disk first and then repair the operation before executing Ghost. Error code: 14030 Cause or countermeasure: The unregistered Ghost version encountered a file whose date exceeded its expiration date. Please purchase a new Ghost version. Error code: 15010 15020 15030 15050 Cause or countermeasure: To return such an error code, try using Ghost -E to avoid such errors. Error code: 15040 Cause or countermeasure: There is not enough memory when executing Ghost. Please confirm that the following statement has been added in config.sys: device=himem.sys Error code: 15100 Cause or countermeasure: Use Ghost-OR to refuse to check or update to the latest Version to solve this puzzle. Error code: 15150 Cause or countermeasure: It may be a corrupted image file. Please use the Local→Check→Image File command to check the integrity of the image file. Error code: 15165 Cause or countermeasure: Ghost has problems accessing files or hard disks on the network. Please check your network device or use the latest version of Ghost to solve this problem. Error code: 15170 Cause or countermeasure: The source hard disk was not formatted or an invalid partition was encountered. Make sure the source hard drive is properly partitioned. Error Code: 15175 Cause or Countermeasure: If you have problems running on a Compaq machine, please use the latest version of Ghost. Error code: 16040 Cause or countermeasure: There are too many partitions on your hard disk. Error code: 19080 Cause or countermeasure: Most of the directories or file names that may be accessed by Ghost are invalid. Error code: 19320 Cause or countermeasure: Ghost cannot be executed due to lack of memory, please refer to the 15040 error message above. Error code: 30004 Cause or countermeasure: The user-supplied password was incorrect when reading the encrypted image file, and the image file could not be used. This article comes from [System Home] www.xp85.com