What should I do if Win10 disk is 100% occupied? Many friends have installed the "win10 disk 100%" problem after installing win10. The colleagues around Xiaobian also encountered such a "win10 disk 100%" problem. Here are some solutions to the search of Pepsi.com. Win10 disk 100%" method, Xiaobian colleagues pro-test useful
1. Close family group
Family group is one of the important reasons for occupying the hard disk. Some netizens reported that after the family group was closed, the hard disk usage rate dropped from 90% to 10%. This is not sensational. Because the home group is turned on, the system will continue to use the hard disk to copy file shares, resulting in a hard disk usage rate of more than 90%, affecting system speed. Most home computers don't need to share files to the LAN.
The following are specific solutions:
Control Panel-Administrative Tools-Services
Find the "HomeGroupListener" service, double-click to open or right-click on the "Properties" command.
In the pop-up properties interface window, click the Startup type drop-down box on the General tab, and select "Disable" from the list that comes out. Then click the "Stop" button in the service state, modify it and click the "OK" button to save the settings.
Similarly, the same treatment is applied to the HomeGroupProvider service.
The number of disk read/write times is greatly reduced after closing the home group
2. Turn off the automatic maintenance plan task
The automatic maintenance function of Win8.1 will occupy a higher level in the running state. The hard disk usage and CPU usage make the low-end computers in the configuration become extremely slow, and even unresponsive and deadlocked. However, we can optimize the hard disk with third-party optimization software. It is recommended to optimize it once every two or two months. The following is the specific program to close the automatic maintenance plan task:
Open path: C:WindowsSystem32TasksMicrosoftWindows
Rename the folder "Defrag" to "Defrag.bak"
After the above two methods are used up, you can also try the following methods:
01Close Family Group
Control Panel - Management Tools - Services – The HomeGroup Listener and HomeGroup Provider are disabled.
02 Turn off Disk Defragmentation, Auto Maintenance Schedule Tasks
Select Disk C-Properties - Tools - Optimize and Defragment Drives - Optimize - Change Settings - Deselect Run on Schedule.
03Close Windows Defender (as appropriate)
Control Panel - Windows Defender - Settings - Implement Protection - Remove Tick and Administrator - Enable Windows Defender - Remove Tick.
Control Panel - Administrative Tools - Services - Windows Defender Service is disabled.
04Close Windows Search
Control Panel - Administrative Tools - Services - Windows Search is disabled.
05 Set up Superfetch Service
Control Panel - Administrative Tools - Services - Superfetch - Startup Type - Automatic (Delayed Start).
06Clean up the Windows.old folder
C drive-right-click-attribute-disk cleanup-check the previous Windows installation checkbox – make sure to clean up.
07Setting Auto Login
Win+R–Entering netplwiz—The option to cancel the use of the computer to enter a username and password – then double-click on the account that requires automatic login – enter your password.
08 Turn off ipv6
Network Sharing Center – Network Connection – Ethernet – Properties – Cancel ipv6.
09 Turn off effects
System Properties - Advanced - Performance - Settings - Visual Effects - Turn off fade-in effects.
10 Turn off virtual memory
System Properties - Advanced - Performance - Settings, select "Advanced", click "Change" in virtual memory, "Automatically manage drive paging file size" pair To remove it, click on "No paging file" below, click "Settings" and "OK".
11 Family Group
The family group is one of the reasons for occupying the hard disk. Some users have reported that the hard disk usage rate has dropped from 90% to 10% after the family group is turned off, but this method may not solve the problem for users who have not joined the home group. Enter services.msc in the Windows search, find the "HomeGoup Listener" and "HomeGroup Provider" services, right-click to enter "Properties", stop the run and set the startup type to "disabled".
12, virtual memory (use with caution, will lead to unknown problems, recommend more than 8GB memory users try)
Win8/8.1 default to open virtual memory, he will dump some applications of memory Go to the hard disk and avoid the situation that the physical memory is not enough. The low-end computer turns on virtual memory, which can improve the running efficiency, but it also brings the burden on the hard disk. If the user's physical memory is 4GB or even 8GB, you can try to reduce the virtual memory, but it is better not to be lower than 2048MB.
Right-click "This Computer", click "Properties", click "Advanced System Settings", "Settings", "Advanced", and then click "Change" in the virtual memory column to allocate virtual memory as needed.
13.IPv6
Under Win8/8.1, the IPv6 function is enabled by default, and the hard disk usage rate is high. It has some responsibility. Therefore, users who do not use IPv6 are advised to turn it off.
Open the Network and Sharing Center, click "Change Adapter Configuration" in the upper left corner, select the NIC you are using, right click, then click "Properties", the slider pulls down, find the IPV6 option to close.
14.Windows Defender
Windows Defender will periodically scan the hard drive. In the past version, this feature could be turned off, but after updating Win10 Preview 9860, it can't turn off the regular scan function, resulting in The hard disk usage rate is high and the system is stuck. Users can try to use Group Policy to limit Defender's scheduled scan or turn off Defender to solve the problem.
Enter gpedit.msc in the search bar to open the Group Policy Editor and navigate to the "Specify weekly run scheduled scans" configuration in "Computer Configuration - Administrative Templates - Windows Components - Windows Defender - Scanning" Select "Enabled" to select settings based on the content in the help. Or turn it off directly in the Windows Defender settings internal management options.
15.Windows Search
For older computers, Windows Search uses a lot of system resources and can be turned off. But the negative effect is that you can't use smart search, you will lose a good integration experience in Win8 or Win10.
Users need to use the above methods with caution. After testing, I found that turning off "Windows Defender" in "Win10 Preview 9860" can effectively reduce the disk usage, but it must be used with caution, because it is possible because of various The reason is that the Defender cannot be reopened. Turning off or reducing virtual memory can cause unknown system problems, such as the disappearance of thumbnails when the settings are correct.
16. The ultimate solution is to solve all problems with SSD solid state drive
Guidance: Recently, many of my friends who are doing communication have gathered together to talk ab
Microsoft will push Windows 10 free upgrades for tablets and PCs in 190 countries around the world o
What should I do if the black screen/blue screen is upgraded after Win10? After you upgrade your com
In order to facilitate the user to enter the password, the right side of the password input box of t
What is Classic Shell? Classic Shell Chinese version download
You really don't know! Win10 hides a few deep tips
Where does Win10 run? How does Win10 run?
Can win10 change the hard disk after activation? Win10 can automatically activate
How do I turn off the Win10 "Find apps in store" prompt?
How to uninstall the Win10 application comes with win10 tips
How to activate win10 official version 2 kinds of Win10 activation method
How to see the win10 version number win10 version number view method Graphic tutorial
360 upgrade assistant detects cpu temperature high solution
Know that using this shortcut key, you will use Win10
How does Win10 clean up the DNS cache? Win10 computer dns cache cleanup command
What are the utilities of Windows 7 Optimization Master?
Win7 system speeds up the method of deleting files
Common problems with IIS under Windows Vista
How to uninstall Baidu browser Baidu browser uninstall tutorial
Pay attention to notebook maintenance Common fault analysis and solution
Linux cancels the SSH login password
How to install and use Glances in Linux
How to modify the Win8.1 desktop path
Win8.1 system has installed flash player but can not watch web video solution