Win7 system connection network prompts how to solve the broadband connection?

Recently, users of Win7 system reported that when they connected to the network, they could not find the broadband connection, which made it impossible to connect to the network. So, what is the cause of this? In response to this problem, Xiaobian summed up the following reasons and solutions, let's take a look.

broadband connection can not find the problem, there are several possibilities:

1, network card failure, or network card driver is not properly installed

2, the network is Disable

3, the created dial-up broadband connection is not created

Solution:

1. Enter the device manager, check whether the NIC driver is installed properly, and see If the network card is disabled, right click “Computer” to select “Manage” & then “Select Device Manager”. Normally, this is the case in Device Manager, as shown below.

The figure shown is the normal state of the network card, if the driver is not installed or is disabled is good, there will be a yellow exclamation mark or a red slash disabled, if a driver problem, it is recommended Everyone downloads the corresponding driver according to their own network card type, and then copy and install it; if the network card is disabled, then right click and enable it.

If the device manager checks that everything is working properly, then it may not have created a broadband connection. It is recommended to delete the original one and re-create a broadband connection.

For details on how to create a broadband connection, please refer to: How to create a broadband connection in the computer_windows7 system

The above are the reasons and solutions for connecting the network under the Win7 system to find that the broadband connection cannot be found. After the above steps are checked, I believe that you can solve the problem of not finding a broadband connection, and you can connect to the network normally.