How to install with CD?
Put the CD in, press DEL or F12 or F2 after booting (the various machines are different), then enter the BIOS, set the boot drive preferred CD-ROM drive. Then save and restart. You can start the CD.
Requires CD-ROM drive, restart the computer and select CD-ROM to start it.
First boot with CD-ROM.
Open
Power
, then observe the screen prompts, press "F2" or "Delete" or "F8" or "F11" "Or "F12" and so on, different computers are different. You can know which key to choose by looking at your computer. If it is not clear, after the power
, click on the "F2" and "Delete" of the keyboard continuously. These two are more common. They must be clicked continuously after the power is turned on, and then a setting screen appears, about Some settings for the motherboard
. If it doesn't appear, reboot and try a few other keys. Remember, the keys must be fast and valid until you skip the splash screen.
The scope of use of the CD-ROM installation system:
1. The first CD-ROM system.
2, the computer can not be turned on, such as the boot partition damage caused by soft faults, the system is reinstalled.
3, the computer can also be used to boot the system to reinstall the system.
PS: U disk mounting system is also suitable for these situations, it is recommended to read "U disk mounting system |
Radish home win7 32-bit system installation tutorial"
Pre-preparation:
1, a complete system disk.
PS: You can go to the computer store to buy, you can also burn it yourself, the ink used here is burned by yourself.
As for how to burn win7 64-bit system CD, and the required win7 64-bit system image in win7 system download 2014 latest version
2, a computer that needs to be reinstalled.
3, know the BIOS boot button of your computer. You can refer to the BIOS startup keys of different motherboards
1. Press the startup button of the computer and insert the CD into the CD-ROM drive of the computer, as shown in Figure 1:
Inserting a CD
PS: The computer does not start, you can't open the CD-ROM drive on your computer by pressing the CD-ROM pop-up button. Need to find a needle, plug in the small hole next to the drive button, the CD-ROM will pop up.
2, after the general computer is inserted into the CD/DVD, the computer will automatically enter the CD/DVD boot interface, no need to set the BIOS. (Because the CD is the first boot item itself)
PS: Of course, some old computers will not automatically run the CD and need to set the BIOS. At this point, our approach is to insert the disc → press the Del key or F12 (different motherboard BIOS startup keys are not the same) → enter the BIOS interface → select BOOT (usually set in BOOT) → select CD /DVD For the first startup item of the computer → follow the interface prompt → press the enter key, as shown in Figure 2:
lenovo BOOT start hotkey to set the disc as the first startup item
3. Then the computer Restart, the interface with the words "press any key to boot from CD..." appears, just press a key on the keyboard. As shown in Figure 3: (The system will automatically boot after a long time)
PS: Some computers will go directly to step 4.
4. Enter the win7 system to the C drive The user needs to partition the hard disk first, and can select the function 4 to run the DiskGen partitioning tool), as shown in Figure 4:
Computer company system installation function selection interface
5. Automatic system The restore operation, as shown in Figure 5, can be seen in the system restore progress interface to view the restore progress. You may be interested in this: how to restore a w7 system one-click
Figure 5 restore progress interface
6. Because it is a fully automatic system installation process, ink dyeing warm heart only intercepts representative pictures, such as Figure 6:
Figure 6 CD installation process diagram
7. When the following interface appears, it shows that the win7 64-bit operating system is installed and activated. As shown in Figure 7:
>
Open the CD step by step installation
After putting the disc into it, there will be corresponding Tips to install
Click - My Computer - dialog box appears - there is a CD icon - click - dialog box appears - click to open - disc drive open - Load the disc - Gently push in the automatic retraction - Automatically read the disc - Display the content - Click on the desired item to get the display title
, you must first set the first boot to the CD-ROM drive.