A, MPEG movie fix reviewed
MPEG video header data if it is broken, you can use UltraEdit or WinHEX, the head bad data MPEG files, can be replaced with normal MPEG header data; if It is the other part of MPEG data is broken, you can use some special tools, such as VCDGear, VLCMediaPlayer, Movie Rubik's Cube 2006, AllMediaFixerPro and so on.
two principles, using UltraEdit-32 fixes MPEG
UltraEdit-32 (Download) repair of MPEG is MPEG file header data of a copy normal playback, the file header attached to the bad the same areas, as follows:
start UltraEdit-32, click on the "file" menu /open, open bad MPEG files, header data to find abnormal position, a record of this offset (e.g. 000000b0); Then click on the menu "File" /Open, open a MPEG file that can play normally, move the mouse to the offset just recorded, locate it slightly larger than the offset (for example, 000000c0), and then drag it up to the partial shift amount at 00000000h, click on the menu "edit" /copy, copy the data out 00000000h-000000c0h paragraph;
bad MPEG file is opened next, starting at the same offset 00000000h, 00000000h to select with the mouse -000000c0h the same range of data, then click the menu "Edit" /paste, replace the normal data that has just been copied out of the bad data, and finally save the bad MPEG file Exit, the entire restoration work is completed
system House Tip:! Before carrying out repair work above, it is recommended to back up the original MPEG file.
Third, the use WinHEX repair
WinHex (Download) UltraEdit same function, it can quickly open 50MB to several GB of MPEG files for editing changes. WinHex repair using the MPEG method and UltraEdit similarly, the normal MPEG header data are used to replace bad MPEG header data, concrete repair steps:
WinHex operation, click on the menu "File" /Open Open Bad MPEG file, find the abnormal location of the header data, record the offset (for example, 00000060); then click on the menu "File" /Open to open a lossless MPEG file, starting from the offset 00000000, with the mouse Drag to the offset just recorded (for example, 00000060), note that it is slightly larger than the offset, for example, drag to the offset 00000070, and then click the menu "Edit" /CopyBlock /Nomally to copy this segment of data;
Next, in the WinHex main window, click the menu "File" /Open to open the bad MPEG file, also starting from the offset 00000000h, use the mouse to select the same range (for example, 00000000-00000070) data, and then click the menu "edit" /paste, replacing just copied out of the normal data out bad data, i.e., the same parts broken away alternate with normal MPEG MPEG header data;
Finally, save and exit WinHex, this time for you to try a variety of MPEG playback software to play, there will be no prompt "does not recognize the format" or "wrong format," and the like, MPEG repair success!
The use of VCDGear repair
if you see when you play MPEG files with a green stripe or plaid and other noise on the screen, indicating that the MPEG file is broken, it is recommended that you use VCDGear3.55 be repaired. VCDGear specialized repair damaged MPEG data, which fix the following steps:
VCDGear first download (Download) installed to run.
in VCDGear main window, click on the top left of the "de-compression /conversion" drop-down list, select "mpeg- & gt; mpeg" MPEG-repair conversion, check the "Fix MPEG Errors"; click "Load ", select the MPEG file to be repaired, and a window will pop up asking where the repaired movie will be saved. Please specify the location and name of the repaired MPEG file, then click "Save" to return to the main software window; Finally click on the "Start" button at the bottom left and the software will automatically repair the MPEG file.
after the repair is completed, the software in the main window click on the "logs" tab, you can see the repair records MPEG files.
Fifth, use VLCMediaPlayer repair
if parts other than MPEG file header data is broken, it is recommended to repair VLCMediaPlayer (Download). VLCMediaPlayer can play incomplete MPEG4, MPEG2 format video files, fix it very simple to operate, the method is:
run VLCMediaPlayer, click on the "File" menu /guide in the main window, the pop-up window select "transcoding /dump to the file";
way then press "the Next", set the input stream is a MPEG file to be restored (e.g. F: 01.MPEG), to select the video and audio coding format, Select the saved format of the file after repair (for example, MPEG1), select the saved location of the MPEG after repair (for example, C:01.mpeg); finally press "Finish" to start the repair conversion. After the repair is completed, the file will play normally!
Sixth, use the movie Cube 2006 repair
domestic video editing software "movie Cube 2006" (Download) MPEG files can be repaired, fix it as follows:
in the upper left In the Project Manager Panel, click the File tab, click the Video button, then right-click and select the Import command to import the MPEG file you want to repair; if you Hope to see MPEG file information, you can right-click the file, select "edit info" to see the main parameters of the MPEG. MPEG files
Next in the top left "Project Manager Panel", select imported, would it onto the "Timeline panel" video track, then click on the "output" button, MPEG repair output; in the window that pops up, click into the "General" tab in the "MPEG files" on the right path to enter the save repaired file;
finally click into the "monitor" tab, click "start" Auto repair MPEG.
Since the movie Cube just to repair the MPEG specification, instead of re-encoding, so it does not impair the quality of the original MPEG video.
Seven, using AllMediaFixerPro repair
AllMediaFixer (Download) MPEG files can be repaired, the repair success rate of 90% to 95%, in addition it can fix WMA /WMV /ASF /WM /ASX/AVI/Vob/RM/MP3, MP2/MP1/MPA/MPGA/MPG/MPA/DAT/WAVE/Jpeg/BMP format files.
with AllMediaFixerPro repair MPEG, operation is very simple, run the software, the main window click on the "File" menu /add files to be repaired MPEG add in; then click menu "Tools" /repair, the software will Take automatic repair of MPEG.