Win8.1 Tip: SecureBoot is not set correctly solution

A new system will always have such a problem, this is not! Yesterday Xiaobian's friends after consulting from win8 to win8.1 to Xiaobian, in win8. 1 The bottom right corner of the computer desktop has always been "SecureBoot is not set correctly", it is very annoying, so how to remove or hide this?
Xiaobian will not, who makes the coffin win8 system? The omnipotent mother helped me. Here is a solution for everyone. You can refer to it.
The bottom right corner of the desktop shows "SecureBoot is not properly configured build9600” Solution

The first mode BIOS:
After setting Secure Boot to Enabled, Secure Boot Status is still off.

Step 1: When the machine restarts to the bios interface, do not stop the “F2” key or “Del” key to enter the BIOS. Different motherboard buttons are different. You can notice that there are general button prompts under bios. . After entering bios, select the Security option, select Reset to Setup Mode and hit enter, select YES and press “Enter & rdquo;;
Step 2: Select Restore Factory Keys and hit Enter, select YES and press Next & ldquo; Enter & rdquo; button;
Step 3: Press F9 or FN + F9 to restore the BIOS default settings;
Step 4: Press F10 or FN + F10 to save and exit, do not stop & lt;; F2 & rdquo; Key or “Fn+F2” key to enter the BIOS. Check the Secure Boot Status. In this case, you should have changed to Enabled and save and exit.
Step 5: After entering the system, you will find that the “SecureBoot is not correctly configured” displayed in the lower right corner of the desktop. The prompt message disappears.
The second mode BIOS:
The Secure Boot Status is off under the Security menu and cannot be changed. As shown below:

Step 1: When the machine restarts to the bios interface, press the “F2” key or the “Fn+F2” key to enter the BIOS. Select the Boot menu item and select the Boot Mode option as UEFI mode;
Step 2: Select the Exit menu item and select the OS Optimized Defaults option as WIN8 64bit mode;
Step 3: Press F10 or FN+F10 Save and exit, do not stop the "F2" key or "Fn + F2" key to enter the BIOS;
Step 4: At this time, check the Security Boot Status under the Security menu to open the state;
< Br>Step 5: After entering the system, you will find that “SecureBoot is not properly configured” displayed in the lower right corner of the desktop. The prompt message disappears.