Win8 wireless network card search can not find the signal solution

pre-installed Win8 Chinese version system, wireless device driver is normal, but can not find the signal. Flight mode is confirmed to be off. As shown below:

Analysis reason: The control of the wireless network card is newly added in the Win8 system settings, and it needs to be enabled to connect to the wireless network.
Solution:
1. Open the charms and select “Settings”. You can use the mouse to move to the top right corner of the screen to open the charms, or you can quickly open them by pressing the keyboard “windows logo key"+“C”;

2. Click “More Computer Settings ”---<quo;Wireless"Menu;


3. Click on “Wireless Settings"lower slider to enable wireless function;

4. After setting is completed you can find the list of networks to search for a wireless signal;

if the network list displays the following information, check the wireless management services (WLAN AutoConfig (WlanSvc) service) whether to start;


WLAN AutoConfig Service Viewing Method:
Right-click in the blank space of the taskbar to select “Task Manager>;

If the message mode is as shown below, click “Details”;

Click on the “Services” tab to find the WlanSvc (WLAN AutoConfig) service and check if the “Status” column is displayed. “Running”;

If displayed as &ldquo ; has stopped”, right click on this service and select “start”.

This method can start this service, but if the service is disabled or manually started, the service will not start automatically after restarting the computer. If you need this service to start automatically, you can click ““Open Service” to enter the service management interface, and modify it to start automatically.
Opening the wireless Internet requires three levels of setup to be turned on: physical switches, software switches and wireless services. The wireless light will only illuminate when the switch is turned on. When the indicator light is on but the wireless network signal cannot be searched, check if the wireless service is not turned on.
Operation steps:
1, open the service management interface.
You can open
in three ways. (1) Right click on the desktop computer icon, select “Manage”, click “Services & Applications>, click “Services 
( 2) Press the Windows logo key (the button on the

logo on the keyboard) and the R key at the same time to open the running interface, input services, and click OK; as shown below:

(3) Press simultaneously CTRL, Shift and ESC three buttons, open the task manager, click on the "Services" tab;

2. Find the WLAN AutoConfig (WlanSvc) service, if it is manual or disabled, right click on this service selection “Enable" (The Task Manager service displays “Start”).
If you want this service to run automatically after booting, right-click on the service and select "Properties", select the startup type as "Automatic", then click "Application", click “Enable”, Click the “OK” button to close the settings window. This will restart the computer and the service will run automatically.
The setup steps can be referred to the following figure:

Note: More exciting tutorials, please pay attention to the computer tutorial section, computer office group: 189034526 welcome you to join