Win10 OEM official version download has been leaked, IT home for the novice friends to summarize a few commonly used Win10 system installation methods, we can choose the most suitable method according to the characteristics of each method. In general, the current popular Windows 10 clean installation method is divided into U disk installation, hard disk installation two ways, for Windows XP/Vista, and non-genuine authorized Win7/Win8.1 users, or want to experience "raw juice Original "Win10 system users. In addition, genuine Windows7/Windows 8.1 users can use Win10 for free by upgrading and installing. If you are not sure about Win10 now, you can also use both systems by installing Win7/Win10 or Win8.1/Win10 dual system.
Win10 official version download, please refer to "Win10 RTM official version ISO image download Daquan"
First, the new installation Win10 (single system or dual system)
As mentioned above, use hard disk installation Or U disk installation These two methods can be applied to most situations, can be installed single system or dual system, 32-bit or 64-bit, automatically generate system selection menu after installing multiple systems. The hard disk installation does not need other auxiliary tools, as long as your computer has a Windows operating system that can be started normally, the USB disk installation requires the help of a flash disk (U disk); note that if you want to install under UEFI Win10, please choose U disk to start the installation method.
Please refer to the specific method:
"The fastest and the easiest! Win10 official version of the hard disk installation method detailed "
"The most convenient and most flexible! Win10 official version of the U disk installation method detailed "
For users who want to install dual /multi-system, there is a simpler method, but this requires the current system and the Win10 system to be installed is the same architecture (for example, You can only install 32-bit Win10 on 32-bit XP/Vista/Win7/Win8.1, as well as 64-bit.) The specific operation method is as follows:
After downloading the image, open the ISO image. Win8/Win8.1 can be double-clicked directly. Win7 can be loaded with the soft disk of the soft media cube (click to download), as shown below.
▲Click "Apply Daquan" in the lower right corner of the soft media cube. Then find the "virtual optical drive"
▲ click "load image", select the downloaded Win10 image
▲ Double-click the setup.exe under the sources folder in the image
▲ can be optional here, does not affect the installation process
▲ here you can use the installation key VK7JG-NPHTM-C97JM-9MPGT-3V66T (only for the professional version of the installation, activation is invalid), click after input "Next" continues; you can also click "Skip", enter the activation key after the installation is complete
▲Click "Skip" and there will be a version selection window, select the version you want to install and click "Next" continues. For the difference between Win10 Professional and Home Edition, please refer to "Microsoft released Win10 official version of the function comparison table, which version is right for you? 》
▲Check the “I accept the license terms” and click “Next” to continue
▲Because we need to install dual/multiple systems, we need to select the second item “Custom” "Installation method
▲Select (except for the current system partition and "system reserved" partition) other partitions, at least 16GB of free space, and then click "Next".
▲ After this, the Win10 installer should be restarted at least twice, and wait patiently for about 30 minutes to enter the subsequent settings.
▲ After the main steps are completed, enter the subsequent setup phase. The first step is to enter the product secret. Key (if the input is entered at the beginning of the installation, the interface will not be displayed), click “Next” after inputting to continue
▲To personalize Win10, you can directly click “Use Quick Settings” in the lower right corner. With the default settings, you can also arrange them item by item by clicking on "Custom Settings" in the lower left corner of the screen. Let's click on "Custom Settings" to see what detailed settings are available.
▲ You can select the data information you can send to Microsoft in the above options. However, it should be noted that if the "Location" information is turned off, the current device cannot be located (prudent devices such as tablets). Click "Next" to complete this part of the setup.
▲Select the ownership of the current device. If it is an individual user, select “I own it”; the enterprise and organization users can select “My Organization” and click “Next” to continue < Br>
▲Enter your Microsoft account information and log in to Win10. If you don't have a Microsoft account, you can click "Create One" in the middle of the screen. You can also click "Skip this step" at the bottom left to log in with your local account.
▲Microsoft Account Creation Page
▲ Local Account creation page, similar to Win7 installation, fill in the user name and set password and password prompt (required), click "Next" to
▲wait for Win10 application settings, use Microsoft account Log in users need to wait longer
▲ After setting, go directly to Win10 desktop, installation is finished
Second, upgrade installation (single system, recommended genuine Win7/Win8.1 users first installation)
Upgrading the installation means migrating some of the current system (optional) to Win10 and replacing the current system. The above mentioned methods can be upgraded and installed, or can be upgraded by the following method:
We take the Win10 Professional installation as an example. After downloading the image, open the ISO image. Win8/Win8.1 can be directly double-clicked. Win7 can be loaded with the virtual CD-ROM of the soft media cube (click to download), directly run setup.exe in the mirror root directory, as shown below.
▲Click on “Apply Daquan” in the lower right corner of the soft media cube, and then find “Virtual Drive”
▲Click “Load Image” and select the downloaded Win10 image
< Br> ▲ Double-click the setup.exe in the root directory of the mirror.
▲ If there is a “User Account Control” prompt, select “Yes”.
▲You can choose here if the time is tight. Select to complete the Win10 installation and then update. Click "Next" to continue
▲ After accepting the license terms, the installation environment will be checked. This may take a while, depending on the amount of software in the system you are currently using. After the check is complete, the installer will list things you need to be aware of, such as missing system features or compatibility with existing software. If there are no items to be aware of, the results shown below will appear.
▲ Here you can also change what needs to be saved after the upgrade. Click "Change what you want to keep", the following picture appears
▲ Select the items to be retained, click "Next" to continue the installation
Note that no matter which option is selected, the current system will be Win10 after the upgrade. The official version is replaced. The “personal files” refer to the contents under the “users” folder; the specific applications can be retained depending on the compatibility of these applications in Win10; if you select “do not retain any content”, the “personal files” will still be upgraded. It is saved and moved to a folder called Windows.old.
▲ After the system re-evaluates the installation conditions, the “Ready” page will be opened again. Click “Install” to display the installation in progress interface. If you choose to keep all content upgrades, this may be a relatively time consuming process, which takes about 1 hour or more, during which the computer will automatically restart more than twice.
▲Enter the upgrade installation interface after the first reboot
After several reboots, the system main body installation will be completed and the subsequent setup phase will be entered.
▲ After the main body upgrade is completed, the system will identify the original system account, enter the password (if any) and click "Next" to continue
▲ Personalize Win10, you can Just click "Use Quick Settings" in the lower right corner to use the default settings, or click "Custom Settings" in the lower left corner of the screen to arrange them one by one. Let's click on "Custom Settings" to see what detailed settings are available.
▲ You can select the data information you can send to Microsoft in the above options. However, it should be noted that if the "Location" information is turned off, the current device cannot be located (prudent devices such as tablets). Click "Next" to complete this part of the setup.
▲For new users, a brief introduction to Win10's new application, you can select the default application in the lower left corner. Click "Next" to continue
▲Awaiting Win10 for application settings, users logging in with Microsoft account need to wait longer
▲ After setting is completed Enter the Win10 desktop, the installation is finished