Win10 blue screen prompt error code 0x000000c2 solution

Win10 blue screen prompt error code 0x000000c2 What should I do? Although the Win10 blue screen problem is not uncommon, then the blue screen error code is "0x000000c2", have you encountered any situation? Recently, Win10 users have encountered this blue screen error prompt, so Xiaobian here introduces the solution of Win10 blue screen error < 0x000000c2”, let's take a look.

The solution is as follows:

First, the system problem, use the system installation CD repair system or use the sfc /SCANNOW repair system in the system; if still can not solve the problem, then only Reinstall the system.

Second, the system files are deleted by anti-virus software, Kabbah and other anti-virus software will sometimes remove the virus-infected system files or drivers. This caused some system files or drivers to be damaged or lost, resulting in blue screen code 0x000000C2. This situation can also be combined with system problems, and the system needs to be reinstalled to solve the blue screen failure.

System repair operation flow:

1, first insert the repaired drive CD into the CD-ROM drive, then restart the computer, press and hold the F12 button will enter the system from the CD-ROM drive, or enter bios, Set the optical drive to the first boot mode via bios. After the CD-ROM drive, the screen will appear Press any key to boot from CD. . Please press any key.

2. After about one minute, the system will appear to welcome the installer menu. The menu contains the following three options:

(1) To install Windows now, press Enter.

(2) To repair with the console, press R.

(3) To exit the installer, press F3.

3, press R to choose to enter "restore console";

4, the system prompts to choose the Windows installation partition, the general default is installed in the first partition, after selection, Press the Enter key to confirm.

5, the system prompts to enter the administrator password, if the administrator password is empty, type the Enter key directly.

6. At the system prompt, such as “C:\\WINDOWS\\”, enter disable cnsminkp and press Enter.

7, enter Exit to restart the computer

Third, the system bios settings error, bios is a software that supports the initial level of computer hardware. Once the BIOS is set incorrectly, such as CPU overclocking, etc., blue screen code 0x000000C2 and other faults will also appear. Bios setting error You can try to restore bios to factory settings.

In summary, if you have recently installed the software or installed a new hardware driver, you can uninstall it in safe mode.

If you encounter a blue screen error under Win10 system, you can consider the above three aspects, you can check the error step by step, and finally solve the problem. Thank you for reading, hope to help everyone!