Win8/win10 update the system after restarting the computer does not respond to the four solutions

purchased computer installed win8 or win10 system, after the purchase back, the boot constantly prompted to update the system. Win8/win10 update the system and restart the computer did not respond, sometimes waiting for more than an hour can not boot or shut down, what should I do? The following small series tells you how to deal with it. Users who need it can learn from it.
Workaround:
The first situation: the computer can still boot to the desktop after the update
This kind of processing method will not wait after booting and shutting down, only the computer system update is closed.
1, click "“ control panel";
2, click “ system and security;

3, click “ enable or disable automatic update <;

4. In the Important Updates column, select “ Never check for updates  ;

5, and finally click “OK”.

Second situation: After updating the system, the computer will boot less than the desktop
Win8, Win8.1, Win10 system. After seeing the boot screen, press and hold the power button to turn it off. Repeat three times in a short time. You can enter the Windows recovery environment. Or directly disconnect the power, so the Windows recovery interface should appear after booting, select "last correct configuration", restart the computer, you can solve. But booting up to the desktop, the system automatically updates and closes, as in the first case.
The third situation: start less than the desktop
Try electrostatic discharge processing, if the notebook is turned off, remove the power cord and battery of your computer; long press the power button for more than 30 seconds, then try to restart. If the desktop is unplugged, press and hold the power button for more than 30 seconds, then try to reboot.
The fourth situation: start less than the desktop
Try to restore the factory system or re-install the system, restore the factory system to write a separate experience, because there are many situations involved.
Related reading:
win8 upgrade win10 system when prompted to upgrade the two failed solutions
Win8 system can not complete the update prompt error code 800F0922 three solutions
The above is the update win8/win10 After the system restarts the computer does not respond to the four solutions, the full content of the introduction, I hope to help everyone.