How to set up ip address win10? Win10 configure static IP address

How to set up ip address in win10, now the LAN is generally configured with IP address, the IP address is divided into two categories, one is dynamic IP, and the other is static IP address. The following picture teaches you how to configure static IP address for win10. Let's take a look!

Tools/Materials

win10 Operating System

Methods/Steps

1, first right click on the network icon and click Open Network and Sharing Center.

2, select “Ethernet”.

3. Click on the "Attribute"

4. Select "internet protocol version 4 (TCP/IPV4") by clicking on <;Properties".

5, enter the IP address, here is the 0 gateway, see how much your router network is, if it is 1, then enter 1 network segment. For example: 192.168.1.22.

6. Click on “Close”

7. After checking whether the IP address is configured successfully, click on “<quo;Ethernet”.

8. Click on “Details”.

9, as shown in the following figure, you can see the IP address just configured.

END

The above is the introduction of the static IP address method for win10. Do you understand it? I hope to be helpful!