How to use U disk to install xp system One button U disk boot disk production tool tutorial

  

Step 1: Preparation and precautions before production 1. Download one-button U disk system software; 2. Download WinXP system to your computer, the latest WinXP system download: http://www.xxx/second Step: Install a key U disk installed system software to make the boot disk installation, double-click to open a key software, the screen is as shown below, insert the mobile storage device, click "One button to make usb boot disk", then start making for you Startup disk;

After a while, the prompt will be successful. As shown below; Note: Since the U disk system file is hidden, you will find that the u disk space has not changed much. Please don't worry if you have not made it at this time. You can also click the “simulation start” button on the software interface to test whether it is successful. After clicking, the following two pictures will appear, indicating the third step of making the success: check if there is any system file on the computer. If you don't have the system, please download the system, the system recommended address: Click to download the system immediately, if you have already downloaded the system or you have the system , continue to the next step. Special reminder: Please put the system in the root directory of the D drive or E drive; if you need to install the system for other computers, you can copy the system files to the U disk. Step 4: Restart, set USB as the first boot disk (Hint: Please insert the USB flash drive first, boot the boot project). The following picture shows the BIOS interface: Step 5: Enter the U disk system boot menu interface System recovery The first method is to restore the system in the PE, the second is to not directly restore the C disk; today we use the first method to enter the PE recovery system: as shown below: running winpePE startup, the startup process will The following interface appears. Due to the different models of the computer, it may take 1-3 minutes to wait. Do not worry. Step 6: Enter WindowsPE and start to restore the system. If you are a new computer or a new hard disk, you need to partition to install the system. , (view the partition method) If you can not open ONEKEY (one-click restore) to restore the system; select the system file you want to restore, click OK after the selection, as shown below; determine whether to restore the system, as shown below: select yes Note: If you are using a system that is not recommended by this site, onekey may not be able to find or open your system file, then decompress your system (iso file) and extract it. The gho files in the disc d or e root directory. In the system recovery, the following figure shows: After the recovery is completed, restart the computer, it will enter the system automatic reinstallation process, just wait. At this point, use a key u disk to install the operating system! You can forget the trouble that you can't install the operating system without an optical drive. It is worth mentioning that since the whole process is to read data on the hard disk, the installation speed is much faster than the installation with the CD. This article is from [website] www.xxx

Copyright © Windows knowledge All Rights Reserved