How to load AHCI driver under Lenovo XP system?

Some netizens said that Lenovo computer uses IDE mode to install XP system. After opening AHCI mode, there will be a problem of booting blue screen restart. Ask how to load AHCI driver under XP to open BIOS. The AHCI option is used to get the best performance from your hard drive.

Analysis of the problem: Windows XP system can not directly support AHCI hard disk high-speed mode, you need to load the AHCI driver before you can open the hard disk mode in the BIOS.

The following is the solution: (For example, Lenovo Ideapad Y460) 1. Device Manager screenshot when AHCI driver is not loaded (chipset driver installed)

2 Download the AHCI driver from Lenovo's official website, unzip the AHCI folder.

3, restart, modify the BIOS SATA working mode to AHCI option, the following changes The hard disk mode method is “AHCI”, and some are Enabled or Disabled (the hard disk mode is modified in different BIOS modes and methods are slightly different)

4. When the system startup is completed, the system prompts to discover the new hardware wizard. Click "No, not this time", then click Next

5, select "Install from list or specific location" and click Next. 6. Point to path: AHCI driver root directory after decompression

7, the installation is successful: click Finish to

8, the restart prompt appears, click "Yes" to restart the computer

9. The following figure shows the device manager interface after installation.