Steps to establish an ADSL dial-up connection in Vista

                  1. Open Control Panel--> Network and Sharing Center--> Set Connection or Network



Figure 1

2, similar to winxp setting interface, select "connected to the internet"


FIG. 2
3, the next


FIG. 3

following default hook is not selected . There is also only a PPPOE connection.

4. Select “Broadband (PPPoE)” and enter the user name and password directly to give the connection a name. Basically similar to the XP interface.



Figure 4

5, if there is no limit other people using the network demand, add the following "Allow other people to use this connection" check. If the ISP has its own dialer, you need to click the "I don't have ISP" option, and the ISP option will appear, as shown below:


Figure 5
6. Click "Use CD provided by ISP" screen appears as follows:

FIG. 6
7, after the basic setting is completed, VISTA will first test the network


FIG. 7
8, if the test is not successful, there will be the following interface:


Figure 8
9, click "Diagnosing problems" arise interface:


Figure 9
10, if you click "still Connection will be created successfully. (You can also click Skip when you start testing.)



Figure 10
11. After double-clicking, the user interface is as follows: