How to deal with the situation of ADSL causing XP system's suspended animation

Sometimes some minor problems in the system are not easy to detect, and you don't know how to solve them. For example, if you get into a system after booting into the system, the typical symptom is that the mouse is placed on the taskbar and a busy cursor appears. Then you The system has a problem of suspended animation. How to solve it depends on the following:

In the default installation state, the Windows XP operating system will automatically set the TCP/IP parameters of the network card to the automatically acquired state; After the Windows XP system starts successfully, it will automatically detect the configuration parameters of the network card to see if the IP address of the network card is static. If the static IP address of the network card cannot be found, the Windows XP system will automatically send out the broadcast information. Requesting the DHCP server in the LAN to assign a dynamic IP address to the current workstation; if it cannot be successfully connected to the DHCP server on the LAN, the Windows XP system will use the private IP address automatic addressing function for the current workstation. Assign a special IP address, which is usually located in the network segment "169.254.0.1~169.254.255.254”

Now, when the virtual dialing operation is performed, the ADSL Modem has automatically stopped the DHCP function by default, so that the ADSL Modem cannot assign a dynamic IP address to the current workstation's network card in time. And when the Windows XP system has a suspended animation phenomenon, you may wish to observe carefully that the data signal light in the Adsl Modem control panel is blinking continuously. When the data signal light stops flashing, the system's suspended animation phenomenon is automatically eliminated; this time, Click the “Start”/“Run” command, in the Open System Run box, type the “ipconfig /all”string command, and then click the <;OK” button, you will be followed The result window shows that the current workstation's IP address is an address in the network segment "169.254.0.1~169.254.255.254". From the above analysis, we can easily see that the Windows XP system will have a fake death phenomenon when dialing in Adsl, mainly because the current workstation's network card can not get the IP address in time, so if we specify the IP address in advance for the network card, Windows The XP system will not be suspended during virtual dialing.

System Fake Death Coping Method

As we mentioned earlier, in order to eliminate the suspended animation of Windows XP system, we must assign a suitable IP address to the current workstation's network card in time; To do this, you can do this in the following ways:

1. Enable the built-in DHCP function

Although many models of Adsl Modem have integrated DHCP into the device, By default, the DHCP function of many devices is not enabled; in fact, as long as the built-in DHCP server function is enabled, the network card connected to the Adsl Modem device can obtain a dynamic IP address in time. To enable the built-in DHCP function, follow the steps below:

First, you need to open the parameter setting page of Adsl Modem. Open IE browser, and then directly enter the string address in the address box of IE. After clicking the Enter key, the screen will automatically pop up a “Enter network password”. Login interface

Then, enter the account name of the ADSL device and click “root”; and access the password “root”, and click the “OK” button to enter the parameter settings of the ADSL device. Window; click on the "LAN" tab in the settings window, then in the tab settings page, click the drop-down button at “DHCP Mode" and select “DHCP from the drop-down menu that appears. Server” option, and finally click on the "Submit" button, so that the built-in DHCP function of the ADSL device is officially launched. Of course, in order for this function to take effect, you need to go to the “Admin” tab page of the ADSL device and select the “Save” option to save the previously set parameters and restart ADSL. The device is only available.

Once the above settings are completed, the Windows XP system can quickly assign a suitable IP address to the current workstation's network card once it requests a packet with an IP address. The address, so that in the virtual dial-up operation, Windows XP system will not appear suspended animation.

Although the current death is not too serious, it may not affect you at a certain time, but this problem can be big or small. It is best for everyone to learn this solution to use it when necessary. Hope Helpful to everyone,