Windows XP post-start delay problem

Five strokes to deal with the delay of WindowsXP startup operation

Symptom: When you start the system interface, you can't open anything. It takes a minute or so to shut down.

Processing method:

First, please upgrade the virus database of anti-virus software, one-sided anti-virus, to eliminate the cause of the virus. what? You don't have anti-virus software! ? -- Unless you are an old bird (this prawn and old bird skip ^_^), then the device is proposed. What? Pirated, can't advance! ? Don't ask this question, I want a method! Cable tray

Second, start → run, output msconfig & rarr; affirmative. In the closed system configuration order, some unimportant services and startup sequence are closed, and the computer is restarted.

Third, enter the "My Computer" - tools - folder options - review - ban "active search network folder and printer" check.

Fourth, after the Windows XP boot into the desktop, the system will temporarily stop for a period of time. At this time, any order will not be reflected. This is because the Windows XP DHCP Client service is deploying the IP address for the network card. The system will temporarily Stop for a while. To deal with this problem, just in the "Master Panel & Rarr; Network Connection", right-click on the "Local Coordination" icon, and then select the property, in the pop-up properties window (as shown in the figure) "Random" In the list of tabs, select the "Internet Protocol (TCP ÷ IP)" option, and then click the "Properties" button. In the pop-up properties window, select “Use the above IP address” option, and break up the output in the "IP address" & "subnet mask" "192.168.0. 1” and “255.255.255.0”, finally click OK to exit the settings window.

Start →Set →Network Connection →Right-click “Local Connection”→Attribute →Double-click;Internet Protocol (TCP÷IP)”→If the IP address is empty, Click “Use the above IP address" to specify the IP address and subnet mask. For example, the IP address can be set to 192.168.0. X (X is any value between 1-255), the subnet mask can be set to 255.255.255.0→ affirmative → affirmative.

V. Eliminate the prefetch directory, enter the C:, WINDOWS, Prefetch folder, and expand the file named pf to delete the whole, restart

Win XP system search failure and processing methods

Fault 1: Click the "Search” button on the Resource Manager toolbar or press F3, the system has no response.

Processing: First enter the C:, Windows, inf folder (the folder property is hidden), right click srchasst. The inf file, select the "Devices" menu, the system will remind you to unplug the Windows XP device CD, which is a search service component from the new device Windows XP. For other faults encountered in the search, you can also use this method as the last straw.

Fault 2: System Reminder "A file that is required to run Search Companion cannot be found. You may need to run setup” (search component not found). Waste liquid incineration

Treatment method: The cause of this failure is C:, Windows, srchasst, mui, BAR under 0409. XSL, BALLOON. If the file such as XSL is corrupted, we can first try to empty the IE temporary folder. If the problem has not been processed, please http:÷÷download. Microsoft. Com÷download÷whistler÷Patch÷Q319949÷

WXP÷EN-US÷Q319949_WXP_SP1_x86_ENU. Exe (English version of Windows XP users), if you have not installed SP1, please install.

Fault 3: The system reminds a yellow triangle with a sigh.

Processing method: First run the “Regedit” command to close the registry editor, and then sequentially navigate to "HKEY_LOCAL_MACHINE, SOFTWARE, Microsoft, Windows, CurrentVersion, Explorer, Desktop, NameSpace, [e17d4fc0 -5564- 11d1-83f2-00a0c90dc849]] & rdquo; branch, find & ldquo; acquiescence in the right window, and modify its value to "Search Results Folder". Next, navigate to "[HKEY_CURRENT_USER, Software, Microsoft, Windows, CurrentVersion, Explorer, Cabinet State]", and create a new string key on the right side of the window, named "Search Asst", and set its value to "ld"; No”.

Fault 4: "Starting" "Search” menu is missing.

Processing method: Run the “Regedit” command to close the registry editor and navigate to “HKEY_CURRENT_USER, Software, Microsoft, Windows, CurrentVersion, Policies, Explorer” and create a new name on the right side of the window. NoFind”'s dword value, set its value to 00000000 (hexadecimal).

The XP output status status is gone.

Close the registry editor and find "HKEY_USERS". DEFAULT, Control Panel, Input Method> branch, correct the key value of “Show Status” in the right window to “1”” (“1” is to display the status bar, “ quo;0” is not displaying the status bar”, and then From the new startup system, the output status bar goes in. This method is practical for Win 98 & divide; 2000.

Close “My Computer & Rarr; Master Panel & Rarr; Regional and Speech Options & rdquo;, under the "Speech" tab, under "Specific Information", click “Set” Under the page, click the “Speech Bar Settings” button, and select “Show the speech bar on the desktop” and click “Affirmative”.

My Computer - Master Panel - Regional and Speech Options - Speech - Specific Information - Advanced, remove the hook behind the closed high text service.

Windows XP Search Utility Effective

Q: My computer is Windows XP. Recently, its file search function cannot be used. When the search interface is closed, the output file or folder name is used. The text box is gray and cannot be output. What should I do? Brick Chimney New

A: Close the registry editor, navigate to [HKEY_CURRENT_USER, Software, Microsoft, Windows, CurrentVersion, Explorer, CabinetState], create a new string value <;Use Search Asst”, set the value to &ldquo ;no”. Review C:, Windows, System32, and Shell32. The dll file is in verbal version, Chinese (0804), English (0600), etc., and the directory names of C:, Windows, Srchasst, mui, and the original 0804 or 0409 are changed to Shell32. The dll speech version is really the same number. Is it possible to use the search assistant now?

Handling Unexpected Searching for Floppy Drives

If Windows 98÷Me often has nothing to do to review the floppy drive, you can review it in order from the above aspects to eliminate the problem. The more the following methods are, the more likely they are.

· Eliminate the material in the "Document" in the start menu. If you have opened the file on the floppy disk and the file name still exists in the "Document", Windows can search for the floppy drive. .

· Eliminate the names in "Run" in the start menu.

· Go to "Settings" ""Mastering Panel", close "System", go to "Performance" page, click "File System", go to "Disk", don't check "Search every time you turn on" The new floppy drive, by default, Windows will not detect your floppy drive when you start the computer.

· Review whether your anti-virus software will review floppy drives (eg McAfee, Antivirus, Pccillin, etc.), please check your anti-virus software explanation.

· Review whether some of the tools on your computer will review your floppy drive.

· Review MSDOS. Outside the SYS file (you must know how to fix the file attributes, the ability to correct the contents of MSDOS.SYS), whether there is a LocalLoadHigh=1 line description, and if so, delete it.

· Review whether it is a virus relationship, forming a system to search for floppy drives (such as NEUVILLE virus) from time to time. Chimney New

· Review the registry:HKEY_CLASSES_ROOT÷CLSID value to see if any of the gates are pointing to the floppy disk.

Local software can't be installed

Q: Recently, my Windows 2000 system has a problem when I install a part of the software. I always have the following reminder after just starting the device: <;Device order The startup device engine failed: this interface is not supported. After reinstalling the system, this problem still arises. How to deal with it?

A: Some software devices require Windows Installer support. The individual processing methods are: Click “Start & Rarr; Order & Rarr; Governance Tools & Rarr; Service & rdquo;, find Windows Installer service, close the property, will start Change the type to manual and start it. Remember to stop this service after the device is in good order. If you still have problems, please go to the Microsoft site to download the latest Windows Installer version 2. 0. If the problem persists, review the following steps: 1 Can you have the authority of the administrator? 2 device files are complex threads, review the running process, if there is an ikernel outside. Exe, it means that it can't be installed now, and the process is finished, then the device is OK. 3 Delete the Program Files, Common Files, InstallShield, Engine folder, and then run the device order.