The method of processing the card temperature is too high

We can know that for the desktop high-end graphics card temperature 90 & deg; within the normal, the notebook graphics card temperature is 85 & deg; The mainstream entry level graphics card has a full load temperature of 70 degrees due to cost control. (Please note that we are talking about the temperature when the graphics card is fully loaded. The standby temperature should be 10-20° lower than the full load temperature.) Therefore, when you suspect that your computer graphics card temperature is high, please judge your graphics card first. After the normal working temperature, follow-up tracking is performed. The possible phenomenon that the temperature of the graphics card is too high: 1, the display screen; 2, the display has colored stripes; 3, the computer blue screen of death; 4, the screen freezes. Analysis of the reason why the temperature of the graphics card is too high: 1. The internal dust of the computer is too much, the heat dissipation is not good. 2. The contact between the graphics chip and the heat sink is poor. 3. The thermal grease on the graphics chip is missing or dried, and the thermal conductivity is lost. The graphics card cooling fan speed is not enough, the power is insufficient, the graphics card temperature is too high, and the general steps: 1. Observe whether the graphics card cooling fan is running normally, add some lubricating oil to the graphics card cooling fan (sewing machine oil can be), if the fan does not turn damaged If you are not a professional, please remove the graphics card and go directly to the IT store to ask someone to replace the fan. 2. If the contact between the graphics chip and the heat sink is poor, you need to apply thermal silica gel and apply it to the sound card driver between the fan and the graphics card core. 3, pay attention to clean the dust inside the chassis, the dust on the graphics card should be more important to clean. You can take a high-powered hair dryer to blow the inside of the chassis for a while, or remove the accessories to clean the dust. 4. Install a convection cooling fan on the chassis to reduce the temperature inside the mainframe, so that the heat radiated from the graphics card can be quickly taken away. 5, use the software to reduce the frequency of the use of graphics cards, of course, this is at the expense of graphics performance. Ok, here I believe that everyone can worry about the temperature of the graphics card is too high. If you have other opinions on this issue, please contact us in the online Q&A section.