Easily give LAN P2P software "underbidden"

1. In the "P2P Control" panel, select the physical network card used for monitoring. If there is a dual network card, please select the internal network card. After the setting is completed, click "Save Configuration" to save the data, and then click the "Start Control P2P Service" button. First, the software scans the hosts in the network and displays the host information on the Monitor Object Settings page.



2. Click on "the object settings" button, switch to the interface shown in Figure 2, which select the desired control P2P traffic in front of the main box, after setting please Click "App Settings" to save the data.

3. Click the "System Configuration" button to switch to the interface shown in Figure 3. If it is ADSL Internet access mode, please select "Run Switch Network Mode" at the bottom of the interface. If it is proxy mode, Then do not select this option, otherwise the control is invalid. In addition, you can also set the "software run to control state", "automatically run when the computer starts", "quick call button" and other options according to your needs. Finally click on "Apply" to save the configuration.



If you just run the initialization wizard, then please do not easily change the "Run switch network mode" option, automatic initialization wizard has been the best settings according to the network information you provide. In addition, if you change this option, you will need to restart the P2P Control Service to validate the parameters you just changed.

You can also view the flow rate through this unit using the Bandwidth View Panel. If the software detects that the machine is performing P2P download, it will automatically control and display the control information to the “System Operation Information” column in the “P2P Control” panel.

After using "P2P Terminator", you can be pleasantly surprised to find that everyone in the LAN is surfing faster.