Download mythology Ten monsters help you 200% liters Thunder speed

Despite the use of grid technology, Thunder has a much higher download speed than other download tools. But we always pursue a higher quality online life, and hope that Thunder can "get faster." Is there any special good trick, on the basis of the original, we will squeeze our network speed, so that the download speed of Thunder "to a higher level"? As it turns out, as long as you do all the details, you can completely break the speed limit and improve the speed of Thunder download, saving you valuable time and money!

Trick One: Do not use Windows XP SP2 firewall

After installing Windows XP SP2, the default system will enable the firewall. Although this is safer, it will allow the system to take up certain resources to filter network packets, which will reduce the speed. Moreover, after the English version of Windows XP SP2 is installed, the firewall is turned on by default, and Foxmail cannot send and receive mail. And because our router or the company's LAN gateway already has better firewall function, we can completely remove this chicken rib: open the "Control Panel", double-click the "Network Connection" icon, right click on the "Local" in the open window Connect, select "Properties", click the "Advanced" tab in the open window, and then click the "Settings" button (Figure 1). In the open window, select the "Close (not recommended)" option (Figure 2). At this point, return to the "Network Connections" window of Windows, you can see that the small lock icon on the "Local Area Connection" is gone, which proves that the firewall function has been disabled (Figure 3).

Figure 1

Figure 2

Figure 3

Trick 2: Let the domain name resolution be direct, faster and more Fast

When we share the Internet through the intranet server, the IP address of the proxy server is often used as the DNS server address. However, when the webpage is opened, the proxy server must be used for DNS resolution, which will naturally reduce the surfing. The speed, and when the proxy server is set incorrectly, it can also cause the webpage to fail to open. To do this, we can bypass the proxy server in the intranet and directly specify the local DNS server address to speed up the download.

Double-click the "Network Connection" icon in the "Control Panel", and right-click the network card for Internet connection in the window, select "Properties", and double-click "Internet Protocol (TCP/IP) in the Open window. (Figure 4), you can see the window shown in Figure 5, select the "Use the following DNS server address" item, enter the DNS address of the local ISP service provider's DNS server in the primary DNS, and at the secondary DNS Enter the IP of the current intranet router's IP or DNS server address. In this way, our network card will use the local city's DNS server to resolve the DNS directly. If the local city's DNS fails, it will automatically resolve the address through the network router or internal DNS server, and the overall network speed will naturally increase. Of course, when Thunder downloads, it will also "swell up".

Figure 4

Figure 5
, Thunder also used the agent. At this point you can open the window of Figure 6, completely remove all proxy servers!

Trick 4: Give Thunder "open small stove" Do not set upper and lower limits

Today's broadband is in full swing, so that everyone can browse articles online, download all kinds of needs It's easier and more convenient to read the information files and watch movies. But many times, some people often enable their speed limit after they feel that the network program is open too much. At this time, we can completely "open a small stove" to Thunder, and let it limit the speed. But the speed of other network programs is limited, so that Thunder can be downloaded more easily under our "special care".

1. Let Thunder enjoy the "small stove"

In Thunder, select "Tools" → "Configuration", click the "Connect" item in the open window, Then uncheck the "Restrict speed to" checkbox under "Restrictions" and set the corresponding limit speed in it (Figure 8). Of course, you can set the "Maximum number of simultaneous tasks" to be more, the default is 5, so it will take up more bandwidth.

Figure 8

2. Restrict other upload and download programs

Next, in BitComet Select "Options→Options", click the "Network Connections" item, and set the maximum download and upload rate on the right. In FlashFXP, select "Options" → "Parameter Settings", click "Transfer" → "Speed ​​Limit" in the open window, then select the "Upload" and "Download" items, and then set the speed limit. Select "Tools" → "Global Settings" in CuteFTP, click the "Transfer" item in the window that opens, and then enter the corresponding speed limit after "Global Bandwidth Limit". In the FTPRush, select "Tools" → "Options", then click the "Transfer" item in the open window, and then under "Speed ​​Limit", select "Limit maximum download speed is" and "Limit maximum upload speed is" check Box and then set the corresponding limit speed.

3. The page should not be too much

For Maxthon, GreenBrowser, TT and other multi-tab browsers, you can limit the number of pages that can be opened at the same time to limit Bandwidth: Select “Options→Maxthon Options” in Maxthon, click “Label” item, then set “Maximum Open Labels” in the right window; click “Options→GreenBrowser Options” in GreenBrowser, click “Window” ”, set “Maximum Open Once” to a smaller value; click the “Tools→Options” command in TT, click the “Browse Settings” tab in the dialog box, and check “Restrict Open” under “Others” The number of items, then set the corresponding number.

After the above settings, we can make the network resources slightly biased on Thunder under the premise of “as needed”, thus ensuring that all programs can “smoothly work”.

Trick 5: Breaking Windows XP SP2 Burst TCP/IP Limits

Microsoft released Windows XP SP2, which increases the TCP connection attempt limit and sets it to a small value of 10, When the system's TCP connection attempts exceed this value, the system will refuse to connect due to security reasons. The intention is to prevent worms such as shockwaves, but in some cases downloading software may cause all network connections to fail when the connection is busy. It will also affect the download speed of Thunder, but Thunder has already "self-solved" this problem: select "Tools" → "XP System Optimizer", and set the corresponding number of connections in the open window, then click " Modify the number of connections button, set it to a larger value, and then restart the computer to make Thunder multi-pronged, all the way mad (Figure 9).

Figure 9

Trick 6: Keep up with the times and always use the latest version of Thunder

Timely update Thunder can correct software bugs and improve software operation. stability. Similarly, the latest version of Thunder will also use Thunder's own download technology. Anyway, Thunder is a free lunch, we can do it with the times: select "Tools" → "Configuration" command in Thunder, click the "Advanced" tab, and then select "Prompt when new version is found" check Box (Figure 10), so you can update Thunder in the first time.

Figure 10

Trick 7: Modify the default download location and thread

1. Give the download a more spacious "three rooms and one hall"

By default, after the Thunder installation, a TDDownload directory will be created on the C drive, and all downloaded files will be saved here. However, since the Windows system is installed by default, temporary files and page files will be generated on it, which affects the speed of the C drive. In addition, most of the software will be installed in the C:Program Files folder by default. After a long time, the space of the C drive will be exhausted. At this time, often the download will also stop because the C drive has no space. In the era of low-volume hard drives and "when selling gimmicks", you can completely modify the download location and point it to a better, larger hard drive, which can also increase the download speed: click "Commonly used in the main Thunder window" Set the "→"Store Directory" command to set the default folder in the window shown in Figure 11. After finishing, press the “OK” button, Thunder will also pop up the corresponding confirmation dialog box. It is recommended to select “Also modify the sub-category directory attribute” and “Move local file”, so the software will also create the default C:TDDownload. Subfolders such as "software", "game", "music", and "movie" are moved together, and files that have already been downloaded are also moved.

Figure 11

2. Make the download thread more

For reasons of stability, Thunder default settings have been conservative, and our The machine and the network environment are better, then you can set it yourself to make it "full speed forward": select the "Tools" → "Configuration" command in the main Thunder window, click the "Task default properties" tab, and then set your own The number of original address download threads and the maximum number of threads available for each download task are sufficient. The recommended values ​​are 8/45 (Figure 12).

Figure 12
Trick 8: Registered minefield service

Some friends who use Thunder to download will know carefully, in the lower left of the main interface of the software, It is a text message that prompts login (Figure 13). After clicking “You have not registered or logged in”, a login dialog similar to Tengxun QQ will pop up (Figure 14). After registering as a friend and logging in, you can earn points by online time length, downloading files, etc., and different points correspond to the corresponding Thunder level. Different levels (military ranks) correspond to different download resources. As the level increases, corresponding Increase the level of resources, for example, Thunder returns up to 40 resources when downloading. When a Thunder member is level 8, the corresponding level resource is 8, and each time you download, you can return up to 48 resources. Needless to say, the more resources, the faster the download speed is naturally (Figure 15).

Fig. 13

Fig. 14

Fig. 15

Tip:

A comparison table of levels and additional levels of resources can be found at http://pub.xunlei.com/web/level.htm.

Trick 9: Find Resources by Hand

When we download a task, it is only a few kilobytes slow. If the link to the download resource of the current connection has expired, you can try to right-click the file. If the "Query more resources" option is optional, clicking it will re-search and connect to the valid download resource. If the option is gray and not selectable, then no more download resources are available (see Figure 16).

Figure 16

Tips: Use breakpoints to transfer skills in a timely manner

If you are using Thunder to download data, find downloads When it is 90% or even 99%, it can't be downloaded. The server that was originally linked is no longer available for download. At this time, we don't have to find another link to start the download again. This is a waste of time. In fact, we can use the "breakpoint resume" to continue the transmission.

The specific method is: first look for a download the same information, and to ensure that the file size and format should be exactly the same URL address. Copy the URL address, then right-click the task that has stopped downloading in the main Thunder download window, select "Properties", click the "General" tab, paste the URL address into the URL box instead of the original link (Figure 17) ), make sure that the file name and save location must remain the same. Finally, click the "OK" button, Thunder can download the rest of the download after the connection is successful.

Figure 17

This method has been tried many times and has been tried and tested.