Using BT to download the system configuration experience

Now using BT is quite hot, let me introduce to you the experience of using BT, I hope to help everyone.

I. Hardware articles

The driver is the soul of the hardware. It is also indispensable for BT because BT operates on disk frequently. It is important to install the motherboard driver. For example, INTEL's IAA and VIA's 4IN 1 drive these well-known drivers. Here I would like to remind SIS users to install the SIS IDE driver and then install the AGP driver.

In addition, for WIN2000 and WINXP users have a few different hard drives, and do not want to buy a RAID card can form a soft RAID, performance has also improved, of course, if your CPU is strong soft RAID performance Nor is it worse than the old RAID hard card.

Second, the system articles

Partition problem: If you use the system above WIN2000 to download the partition file system, it will be NTFS. Because many BT download tools are said to reduce disk fragmentation, it is a few G's. It is a temporary application of disk space, so there will be a lot of fragmentation as soon as it comes up. This leads to a decline in the performance of the hard disk.

Virtual Memory: An important setting in the operating system. It is used when the memory is not enough. There is no general optimization mode for virtual memory, mainly depending on your computer configuration. We use BT to download the best place to put virtual memory on the D drive (if your system is on the C drive).

Disk Cache: Now CPU, memory and other speeds are getting faster and faster, and the hard disk transfer rate becomes the bottleneck of the performance of the whole machine. The setting of the cache is obviously important. You can adjust it by "System Performance Optimization /Input Output Settings" in WINDOWS Optimization Master. (Figure 1)

Memory: By setting "system cache" setting on the "System Properties /Advanced /Performance /Advanced /Memory Usage" (Figure 2), we can get a different optimization effect.

service: we now more and more attention to safety, the "Server" service can be shut down WINXP default shares are closed. And BT is a software that needs to share the spirit, so BT will lead to frequent crashes. Therefore, it is recommended that you install a firewall to ensure the security of your computer.
Third, the use of

Temperature is the first killer of the hard disk. For a friend who uses BT for a few G, maybe the person is resting and the computer is still open there. A tens of hours of running in the chassis that requires too much heat requires a cooling process, let it rest for a while.

Try not to play online games (such as Lianzhong, QQ games, etc.) under BT, and do not use other download tools (such as: Internet Express) to download. Otherwise the speed will drop quickly.

Don't open multiple seeds in BT. First, because of the hard disk, the second is a waste of popular seed resources. What is a hot seed? Multi-seed multi-user downloads the fastest seed. When we encounter hot seeds, it is best to turn off other seeds in BT and enjoy the quick download of BT.

Using BT is very resource-intensive, we can achieve the goal through the "task manager". Press Ctrl+Alt+Del to right-click in the Task Manager and click Set Priority /Below Standard or Low to adjust.

Firewall Problems

I used BitComet to download and added services to the "Advanced Settings" of the firewall (Figure 3). In the "Network Connection", right-click "Properties /Advanced /Internet Connection Firewall /Settings" and write "Description", "IP address or name of the machine", "Port number used" in order to use normally.

Fourth, BitComet software settings

The first thing we BitComet folders to conduct some understanding, "Torrents" is located at the BitComet seed and configuration files, "Downloads" to download the software store .

1. Run BitComet 0.57, open BitComet's “Options” column and click on the first column “Network Connection” on the left. (Note: Please adjust according to the specific configuration of your computer and network bandwidth. Please keep the original settings unchanged for the unspecified parameters.)

"Global maximum download speed /unlimited" is adjusted to "1000" (The following are adjustments for 2M bandwidth users).

"Global maximum upload speed /unlimited" is adjusted to 50 (according to your personal circumstances, this is my recommended number).

The "listening port" is not recommended to be repeated with 6881-6889, 16881-16889. It is best to set the port to 19770-22000.

(If you map the port, then the port that you mapped is the correct one. The user who installed the firewall opens your listening port in your firewall.)

2 Click "Appearance of the interface /display of the maximum number of peers" is changed to: 1000.

3, click "Advanced Settings", will be added "If you can't connect within a few minutes, add alternate Tracker: 30" to 0.

4, click "Network Connection" in turn, "Maximum number of connections per task /automatic adjustment": to: 1000.

"Number of connections per task /automatic adjustment": Changed to: 50.

"Global guaranteed upload connections /automatic adjustment": changed to: 10 .

"Connection Initiation Interval /300": Changed to: 150 or 100.

"Maximum number of TCP connections attempted at the same time /500": Changed to: 1000.

"Is it possible to interconnect the internal network through UDP": The intranet setting "Allow" public network setting "Prohibited".

(Intranet is)

5, click "IP Rule /Download Task Maximum Allowed Connections per IP": Change to 20.

"Maximum number of allowed connections per IP for upload tasks": Change to: 5 .

(Internet users should put "Allow to report intranet IP to the server for easy connection within the subnet")

6. Click on "Disk Cache" (the following memory is 256M)

"Disk Cache Minimum: 8M"

"Disk Cache Max: 32M"

"Reduce Disk Cache When Free Physical Memory Is Low": 48M < Br>

Hook the auto-adjust cache size in the maximum and minimum range.

Summary: The above settings pay more attention to the balance of performance, can not ignore the performance of the whole machine because of downloading BT, after all, we have to use the computer to do other work. Don't rush after you finish BT, leave the seeds for a while. Of course this is an ethical requirement. After downloading, don't forget to kill the downloaded software. When you stop downloading, you should wait until the "Upload/Download" is zero, then turn off BT. Finally, I wish you all a happy download.