DiskGenius hard disk physical bad track repair tutorial

                    DiskGenius 3.7.1 Standard Edition is a relatively new and very easy to use version. Because it is a software developed in China, the Chinese interface is very friendly, and the function is very powerful. Of course, it can be used in 64-bit Win 7 system. Personal use feels very good. Right click on the hard drive letter and select “ Bad track detection and repair " The following interface appears, you can still choose a different drive letter. In the lower left corner, there is “Start detection” and “Try to fix”
Please select the hard disk to be checked first and set the detection range (cylinder range). Click the “Start Detection” button and the software will start detecting bad sectors. When bad sectors are found, bad sectors are displayed in the dialog box. As shown below: When

bad sectors encountered during a test, the detection speed becomes slower. After the test is completed, the software reports the number of bad sectors detected. After

detection is complete, you can click & ldquo; Save Report & rdquo; button to save test results to a text file. For future use.

If you'd just try to fix bad sectors detected, click & ldquo; try to repair & rdquo; button. The software displays the following prompt:

IMPORTANT: repair bad sectors will destroy the data in the vicinity of bad road! Whenever possible, be sure to back up your disk data first. If there are important data in the bad track area, please do not use this function to repair bad sectors, but send the hard disk to the professional data recovery center to recover the data. Bad track repair will destroy data, not restore data! In addition, it should be noted that not all bad sectors can be repaired, and the types of bad sectors that can be repaired by this function are limited. For data security, it is recommended that disks with bad sectors be no longer used. Even bad sectors have been fixed. In particular, do not store important data on it. If the bad track test has not been performed, or the bad track test is performed with other software before running the software, in order to save time, the software can also be used to repair bad sectors without detecting.

If the repair is successful, the software will report the detection results & ldquo; has been fixed & rdquo ;:

repair is complete, the software reports the number of bad sectors have been fixed. Please actually check the repair results.