Win10 boot press F8 can not enter the safe mode how to do?

  
Win10 boot press F8 can not enter the safe mode how to do? Many friends who are used to XP and Win7 system will find that after installing Win10 system, press F8 and can not enter the safe mode, only through the Win10 system configuration, set the security boot, You can enter safe mode (detailed tutorial: How to enter Win10 security mode? Graphic Win10 boot into safe mode method). The following article mainly teaches you how to implement Win10 boot and press F8 to enter the safe mode.



Win10 boot press F8 to enter the safe mode method (Figure 1)
First step: First need to prepare a Win10 image of the U disk boot, this everyone knows that when installing Win10 system, it used this U disk.
Second Step: Insert the Win10 image of the USB flash drive into the computer, and then set it up from the USB flash drive. Next, you will enter the following Win10 system installation interface. At this time, do not install it, but in this interface, press shift + F10 directly. Combine shortcuts to open a command prompt as shown.

Step 3: Then type the name: bcdedit /set {default} bootmenupolicy legacy After typing, press Enter to run, as shown below.

After running the command, restart the computer, unplug the U disk, and then try to press the F8 key to pop up the safe mode option, then select to enter the safe mode, as shown in Figure 1.
If you want to restore to the default state, you can run the naming: bcdedit /set {default} bootmenupolicy standard restore in the administrator mode "Command prompt" or the above command operation.

Copyright © Windows knowledge All Rights Reserved