64-bit win7 Ultimate computer boot appears "no floppy disk in the drive" how to deal with

1. If the computer has a floppy drive, this is because the floppy drive was used during the last shutdown, but the system window has not been launched. The software is directly taken out, so every time I call my computer, I will be prompted to insert the floppy drive. Solution: Insert a floppy disk (no floppy drive, insert the CD into the CD-ROM drive), then just click inside the content, or copy a file. Go in, wait for the copy to complete, then close my computer and other windows, then remove the floppy disk, restart the computer, the problem is solved.
2, if the computer does not exist floppy drive but the software is enabled, this will happen, just disable the floppy drive. The method is as follows:
1) Press DEL to enter the BIOS interface when booting, select: STANDARD CMOS FEATURES, and then set the sub-items as follows:
DRIVE A: Set to None
DRIVE B : Set After setting for None
2), press F10 to save and enter “Y” Enter.
3, set the CD-ROM in the BIOS for the first boot device to insert the system installation disk, press R to select “ repair installation & rdquo;
4, if the fault still exists, press F8 to enter the advanced option interface, select “ the last correct configuration & rdquo;, press Enter to repair, try to restart after the repair, enter the normal mode.
5, or use the system's own system restore, restore to the time you did not have this fault repair (if the normal mode recovery fails, you can enter the safe mode to use the system restore).
6. In the end, if you can't do it, you can only reinstall the system.