Blue screen fault map:
First, the correct installation of the notebook hardware driver
After refreshing the BIOS, some notebooks will still appear blue screen restart information, in this case we have to check if it is some The driver of the hardware is not installed correctly, or some of the latest installed hardware is not working properly.
The method is: first enter the control panel in the start menu, and then go to “system”→“device manager” In the middle, check if the notebook hardware is not installed correctly or there is a conflict. If you have a question mark on a device, you need to go to the relevant hardware manufacturer's website to download the latest driver, and then re-install the driver for the notebook.
If you encounter a blue screen after installing new hardware, and the replacement driver is invalid, then it is likely that the hardware itself or the hardware driver has compatibility problems with the notebook or operating system, then we only need to remove the The hardware can be disabled by disabling the hardware in “Device Manager"
Second, strengthen the notebook cooling
If the notebook is used for a long time, the internal will certainly accumulate a lot of dust, if the weather is very hot, it is easy to appear poor notebook cooling, resulting in a notebook blue screen.
Solution: You can download a master software to check whether the computer hardware temperature is in the normal range. If the temperature is too high, we recommend that you do a dust cleaning on the notebook, plus heat dissipation.
Three, other reasons caused by the notebook blue screen
Sometimes it is impossible to determine what causes the computer blue screen, we can find the reason and solve the problem through the blue screen code, interested friends can read: Win7 computer common blue screen Code and processing methods, if the above methods are still not working, there may be notebook hardware problems, it is recommended to take a look at the repair.
Fourth, adjust the hard disk cache
When the capacity of the system partition is too low, it is likely to cause the virtual memory value of the machine is too low, this situation will also lead to blue screen, then you need to free the hard disk space or let the system automatically set the virtual memory To solve the problem.
Operation steps: The simple method is to delete the temporary files in the system partition (usually C drive), increase the system memory capacity, or set the virtual memory to set the drive page file size from “custom size” to “ System management size & rdquo;, this can solve the problem that the system disk capacity is too low and the cache is too low, causing the machine blue screen to restart.
5. Upgrade the notebook BIOS
The BIOS of the notebook may have some bugs in the design when it leaves the factory. The manufacturer usually adopts the method of upgrading the BIOS to solve these bugs. If our notebooks are often blue screen and can't find the reason, try refreshing the notebook BIOS.