Windows7 can not enter the system solution

The problem of using the computer, it will inevitably encounter the situation that the computer can not start normally. Generally, we will press F8 to enter the safe mode of the system and further set the computer. But if you can't enter the system by pressing the F8 button at this time, what should we do? The following small series teaches everyone how to get into the safe mode.
1, the specific problem is the boot below the following picture:

2, this problem occurs, if you do not have important things in the computer, personal advice or reinstall the system, the following how to not reload If you have a USB flash drive, or if you have a system disk 3, if it is a USB flash drive, you should set it on the bios motherboard and set it to boot from the USB flash drive. Command prompt tool under WinPE system; then enter the following DOS command at the position where the cursor is located (press the Enter key for each DOS command): 4. The command is: cd: windowssystem32
bcdedit /Set {default} osdevice bootbcdedit /set {default} device bootbcdedit /set {default} detecthal 1 effect as shown:

The above is about win7 system can not get in, press F8 also no mode how to do, Xiaobian according to The above can be entered into the system.