Usually, Win7 is installed through Win7 installation CD, but the installation speed of the installation CD is slow, and the installation CD is not easy to carry, it is also easy to damage. If you want to help others install the system or install multiple computers at the same time, then Trouble! In fact, the system installation can be simpler ——“copy” can be!
Repair and boot automatically according to the prompts
After the copy is completed, a prompt window will appear, prompting “If after recovery” The boot sector has no boot information and the system may not boot. Are you using the following parameters to fix the [C:] boot information? & rdquo;, be sure to click “ Yes & rdquo; Repair.
After the operation is completed, in the WinPE, the file under the root directory of the Win7 installation CD (or image file) "bootmgr" and the directory "boot" are also copied to the root directory of the C drive.
Now, there is already a Win7 system in the C drive. If it starts, it will prompt an error. It doesn't matter, use the Win7 installation CD to start the computer. When you go to the “Install Now” step, select “Repair” below the interface. Computer & rdquo;, then select “ repair and restart & rdquo;, you can quickly complete the repair and automatically restart. At this point, the CD is removed and the system can boot from the hard disk.
After the computer restarts, just like running the system for the first time, update the registry settings, start the service, install the device … …
This method is used only from copying the system files to successfully entering the desktop. In less than 15 minutes, it saves half the time compared to the traditional method of using CD-ROM installation (it is faster if you use Win7 image file installation)! You only need to prepare a WinPE CD (or WinPE flash drive), a Win7 installation. CD (or Win7 system image file) and "ImageX one-click recovery" software can be.
System“Copy” ImageX to help
Why does the system not need to be installed, just need to copy ” can be used? In fact, there is a name in the Sources directory of the Win7 installation CD. .wim” file, which contains one or more operating systems that have been installed. In other words, Microsoft has actually installed the operating system. We just use ImageX to copy the installed system from the CD-ROM to the hard disk, and then configure the boot entry for the operating system that is copied & rdquo; Can complete the installation of the system, it is so simple!
Dong Master Tip: Simple copying and pasting is of course not possible, which is why you should use ImageX. ImageX will automatically decompress the content we need in the “install.wim” file during the "copy" process.
In addition, using ImageX requires manual formatting of the hard disk partition before operation. If the hard disk does not yet have a partition, start it with WinPE CD, use the application on the CD (such as DiskGenius) to partition the hard disk, set the C drive as the active primary partition and format all the partitions. If the hard disk is already partitioned, format the C drive.
However, the original ImageX program should be run in a DOS environment, and some DOS commands should be entered, which is too "always" for ordinary users. It doesn't matter, we can use another software ——“ImageX one-click recovery" (also called "GGhost one-click recovery"), which has integrated ImageX. Through it, the entire operation process can be completed in the graphical interface, the user only needs to click the mouse as needed.