In the win7 system, broadband access is done through ADSL PPPOE, but it has not been connected. During the connection process, the broadband connection in the lower right corner will turn. When the prompt is not connected, the icon will be placed in the lower right corner. Prompt & ldquo; Internet access - Local connection display is not recognized & rdquo;.
Unidentified network start (if this can be skipped normally), click on the customization below to see if it is selected for public? Change to special-> Next-> Close (as shown below), OK After waiting for a while, there will be a window to choose the network situation. You can choose what family, company or something. This depends on the individual's needs. (The icon can be changed at any time by customizing it after normal-> Change).
It will take a while for it to take effect, because the computer should automatically detect it, use this time to set the IP.
Click on the broadband and local view status respectively, and select their IPv6. The option (as shown below), this is due to the consideration of the boot speed, or it will automatically get the IP segment that is not in contact with us every time it is turned on, it is a waste of time. (The education network should not be closed, Other telecom Netcom users should be shut down, this technology is too far away from us)
The settings of IPv4 are as follows, IP address: 192.168.1.2 (to set this, because the IP address of the machine should be The following gateway is on an IP segment. The subnet mask is automatically assigned three 255 and one 0. The address is: 192.168.1.1 ( Is the default),
About the following 2 DNS servers, the IP is changed according to the location. Each province or municipality has its own IP segment. It is recommended to use EVEREST Ultimate to view it and open it. Click on Network Devices -> Windows Network, check the network configurator address. You can see it clearly, then fill them in the preferred and alternate DNS respectively.
This is almost the same, restart the computer, see Look, if the connection is still limited connection, open IE, enter 192.168.1.1 in the address bar, press Enter, take the initiative to visit our ZTE ZXDSL831B ADSL Modem, well, have solved, perfect!
Not yet, can't say that this is perfect. After the restart, the local connection becomes restricted again, and why do we have 2 network settings? Why can't we have only one? The answer is of course. And it's easy to add. The effect is as shown in the
method is to click a custom, then click to merge and delete the network location, (as shown)
Then check ADSL broadband connection and local connection, point merge , then select the broadband connection in the next window, merge (that is to put Connected to the dial-up broadband connection in the merger). This will no longer be prompted that the connection is limited.