Display color calibration Screen Calibration function and usage method under Win7 32-bit system

First, the work that needs to be prepared:

Make sure the display is set to its original resolution, which can help improve the accuracy of the calibration results.

Second, Win7 32-bit system display color calibration Screen Calibration function specific use steps:

1, first press “Win+R” open “ run & rdquo; window, then enter <;DCCW” command, then enter;

2, then in the pop-up display color calibration window, click the next step according to the system prompt, then go to “ welcome to use the display color calibration & rdquo; interface Start setting;

3. Move the slider in the left frame of the window to minimize the visibility of the small dot in the middle of the circle on the right, then click “Next” Continue to set to the next screen. ;

4, then move the 3 sliders below until all the color cast corrections are removed in the gray bar. Click “>Next” until the completion is completed;

5, then tick Select “ Click Clear to start the ClearType tuner ---&&quoquo;, then click Finish;

6. In the ClearType text tuner, check the option to enable the ClearType” Complete the adjustment of the text in the monitor Harmony, click “Complete & rdquo; It will be fine, so after the setting, the picture and text will be displayed with the best effect.