What should I do if my computer is frequently stuck?
Analysis 1: CPU is full, causing resource exhaustion, and some executable programs (exe/dll) may have bugs or incompatibility with your computer, or For other unknown reasons, the CPU usage will increase sharply during the operation, which will lead to the exhaustion of system resources, so the problem of Caton will come. To solve this problem, it is recommended that you can use the system's own task manager (can be opened through the taskbar right-click menu or Ctrl+Alt+Del shortcut) to view the system resource usage status, you can switch to the process and performance tabs respectively. Cary to see if there are programs that take up too much CPU, by the way, you can also check whether the computer's physical memory, virtual memory /page file (PF usage rate) is too much.
Analysis 2: Windows system itself is unstable or virus-induced failure This situation is more common, the general computer problems, our first thought may be anti-virus, it is best to come to a full disk Thoroughly kill and kill, if necessary, you can review it many times. If the virus is not found after the scan, then there may be a problem with the system itself. For example, mismatched patches, system files have been tampered with or deleted, D version system, if you can not solve the proposed Fifi blog children's boots can replace /reinstall the system.
If the hardware is aging and damaged, how can the computer not have problems? Of course, none of us want to have a problem with our
computer hardware
. If it is hardware, it can only be repaired. . . There is also a special case of problems caused by the environment around the computer. For example, the temperature, humidity, and dust in which the computer is located may cause the computer to operate abnormally. If the temperature is too high or too low, it will seriously affect the normal operation of the electronic components in the chassis. This can be detected by software such as Master Lu. If the humidity is too high, the chassis circuit board will be short-circuited and the humidity will be too low, which will cause static electricity. Serious dust in the chassis can also cause various problems.
1, the system partition disk check error. Ctrl+Shift+Esc--File--Ctrl+Mouse click “New (Build) Task”; type chkdsk /r %systemdrive% in the black window, press Enter, if prompted to plan to restart this volume next time? Select "y" and restart your computer for inspection. Longer time.
2, virtual memory view settings. Win key + R, enter sysdm.cpl Enter - Advanced - Performance - Settings - Advanced - Change - Custom size - Initial size, maximum: 2900, 5800 (2G memory 3400, 6800, XP It is 2046, 4092; 8G and above does not need to be too large) - set, always "OK" to restart the computer.
3, the implementation of 360 security guards: system repair (conventional repair), optimization acceleration, computer experience, computer cleanup.
4, system partition defragmentation (SSD please ignore). Win key + R, enter diskmgmt.msc Enter, "disk" right - properties - tools - defragmentation - start finishing /defragmentation /optimization immediately: select the disk to proceed.
Change a larger memory.
The easiest way is to reinstall the system!
Re-doing the system
The memory is not enough, there are too many running programs, the CPU is overheated, and the garbage is not cleaned up in time. It is the root of the computer card.
Optimized with 360, it is not good. Redo system
You can try it Power
Unplug it, plug it in again, 80% will be good