Computer easy card machine
Hello, there are many reasons for the slowness of the computer card: First, clean up the disk and defragment the disk.
1, in my computer window, right click on the drive letter to be cleaned - "Properties" - "Clean Disk" - check the file to be deleted - OK - Yes.
2, clear the temporary file, start - run - enter %temp% - OK.
3, use the optimization master or super rabbit to clean up the registry and junk files.
4, close some startup programs, start-run -msconfig---start, except for
antivirus software
, input procedures can be turned off.
5, delete unused program software.
6, defragmentation of the disk - start - all programs - attachments - system tools
- disk defragmentation program - selected C - analysis - defragmentation.
Second, optimize your computer with optimization master or super rabbit, and then choose the following methods to re-optimize.
1. Disable the idle IDE channel, right click on "My Computer - Properties", then click on "Hardware" and then click on "Device Manager", open "IDE ATA/PATA Controller" and enter primary and secondary respectively. To the IDE channel, select "Advanced Settings", find the item "Current Transfer Mode" as "Not Applicable", and set the "Device Type" of this item to "None".
2, optimize visual effects right click "My Computer" - "Properties" - "Advanced", in the "Performance" column, click "Settings" - "Visual Effects", adjust to the best performance, Or just keep some of the necessary items.
3, startup and failure recovery "My Computer" - "Properties" - "Advanced" - "Startup and Troubleshooting" click "Settings", remove "Write events to the system log", "Send" Manage Alerts, "Automatically Restart" option; set "Write Debug Info" to "None"; click "Edit" in the pop-up Notepad file: [Operating Systems] timeout=30 Change 30 seconds to 0 seconds .
4, disable error report "My Computer" - "Properties" - "Advanced" - click "Error Report", click "Disable Error Reporting", check "But notify me when a serious error occurs "--determine.
5, set the system restore Click "Start" - "All Programs" - "Accessories" - "System Tools" - "System Restore", in the system restore interface, remove the "system shutdown on all drives" In the "Available Drives" area, select the partition where the system disk is located, click "Settings" to enter the "System Restore Settings" window, and adjust the "Disk Space to Use" to 5% or less. , "OK" to return, disable other partitions as described above.
6, close the automatic update to close the automatic update specific operation: right click on "My Computer" - "Properties" - "Automatic Update", in the "Notification Settings" column, select "Close automatic update. Select "I will manually update the computer".
7, close the remote desktop right click "My Computer" - "Properties" - "Remote", "Remote Desktop" in the "allow users to remotely connect to This computer is ticked off.
8. Disable the sleep function Click "Start" - "Control Panel" - "Power
Management" - "Hibernate", before "Enable Hibernation"
9. Turn off the "Internet Time Synchronization" function, click "Start" - "Control Panel" - "Date, Time, Language and Regional Options", then click "Internet Time" to cancel Check the box before "Automatically synchronize with Internet time service".
10. Turn off the disk index to open my computer, right click on the drive, select "Properties", and uncheck the "Use index to quickly find files" check box.
11. Disable redundant service components and right click "Computer" - "Management" - "Services and Applications" - "Services", in the right pane, set the unwanted services to disabled or manual.
12, close Dr. Watson Click "Start" "--"Run"--Enter the "drwtsn32" command, open the Dr. Watson window of Dr. Watson, only retain the "Dump all thread context" option, cancel the front of the option.
13, set virtual memory virtual memory The minimum physical memory is 1.5-2 times, and the maximum value is 2-3 times of physical memory. The virtual memory setting method is: Right click on my computer - Properties - Advanced - Performance Settings - Advanced - Virtual Memory Change - Select the system letter in the drive list--custom size--set the values in "Initial Size" and "Maximum", then click the "Settings" button, and finally click the "OK" button to exit.
< Br>
Should buy a better computer
CPU memory hard disk< u> Graphics card
will cause
Upper configuration image
There are quite a lot of graphics memory, bad sectors, etc. that cause such problems. It can detect whether the hard disk has bad sectors