Now more and more people use VISTA and Win7 system, and most of them are RealtekHD sound card. The setting problem is very different from XP system. Let me introduce the setting under Vista system. A little experience with the sound card, please advise if there is something wrong.
tool /material
RealtekHD sound card and sound drivers
/method
. 1, open the "Control Panel", open the "Sound" option (FIG. One).
Figure open the "Sound" option
2 in the "Control Panel" in the "Sound" dialog box, select the "Record" tab (Figure II), in general, There are only two options for “Line Input” and “Microphone”. There is no “Stereo Mix” option. To open the “Stereo Mix” option, right click in the blank space and select “Show Disabled Device”. "Stereo Mix" option; right click on "Stereo Mix" and select "Properties" to open the "Properties" dialog.
---- ----
digression Some systems may even microphone options are not, in fact, is not activated, the system automatically shielded, not shown, to find these Shielded options, right click in the blank space of the "Recording" option, select "Show disabled devices", generally can display the shielded options, then select the option to use, enable it, then restart the computer, you can activate These options, this is the focus and then continue to set.
---- ----
digression Figure II "Record" property
3, in the "Properties" dialog box, in the following device usage Select "Enable" and click "OK" to return to the sound dialog (Figure 3).
Figure III set "Record" properties continue
4, select "Stereo Mix" item, click the "Make Default", click "OK."
here, and be sure to "restart the computer" so just to take effect, otherwise it does not work!
5, restart the computer, open the "Control Panel", open HD Audio options (Figure I), select "Microphone" option.
6, set the volume level (usually set to maximum), click on the next button to open the microphone to enhance dialog box (Figure IV). FIG
four volume set, microphone boost
. 7, pulling the slider, enhanced amplitude adjustment (typically +20 to +10 or) (Figure 5) close the dialog.
Figure V microphone enhancement settings
8, select the "Speakers" tab, click on the "Set as Default Device."
---- digression ----
HD sound card in Vista, there is a very special feature is the shield of original music and tone function. When you enable this feature, when you play the song with the player, you will find that the original singer's voice becomes very small, and the accompaniment has not changed, just for you to sing. With this function, you don't have to go online to find pure The music of the accompaniment can be done directly with the original MP3. As for the tone change, needless to say, you will understand what is going on, there is not much to say here. Figure VI shield
original music and tone features
Open Method: In the above 8, in the open "Speaker" option card, select "Properties" Properties dialog box opens , select the "Enhancement" tab, in the middle, there are "eliminate the original sound" and "transpose" options, as long as the check, then "OK." You will realize the effect of this function right away.