How to enter the safe mode of the Windows 8 system

First, by setting "System configuration" to restart into the safe mode
This requirement can enter the system, can open the control panel, or start the screen, or run the command.
The following only introduces the method of entering the system configuration by running the command (the easiest and quickest):
Click the Windows Start+R button at the same time, pop up the run command box, enter "ldconfig;msconfig" in the box and press Enter (not included) Double quotes), the meaning of this is Microsoft (ms, Microsoft, Microsoft's abbreviation) configuration (config).
Select the boot tab page in the pop-up system configuration, start to the normal security mode, just need to set as shown below:
After clicking OK, prompt to restart, it will automatically enter safe mode after restart.
Among the other options, the other shell refers to the safe mode with reboot to the command prompt. The network refers to the safe mode of rebooting to the network connection. Others are basically not used here, so I won't say it.
Note: If you don't understand it, don't change it at will, otherwise you may have incomplete function or even turn on the blue screen.
Second, the way to restart from the metro interface into the safe mode
This and the above is actually a change of soup. Here are the steps:
Select the settings on the charm toolbar that pops up when the mouse moves to the lower right corner, select Change PC settings in the lower right corner of the popup bar; select Immediately in the Advanced Startup at the bottom of the General tab of the PC Settings app. Restart; you can also press the restart button to enter the advanced startup while holding down the shift key.
In the advanced startup, select the advanced option, and enter the boot settings in Windows, and then restart is the security mode of Windows 8.
Third, add a Windows 8 security mode startup item
The idea of ​​this method is to create a new free xp system download boot project that is the same as the current system, and set this project to boot only to a certain security mode.
The advantage of this is that you can press F8 at boot time, select the operating system, and be able to enter safe mode when the system fails to boot.
The following is an example of booting into a security mode similar to the default security mode of the old system.
1. Find the boot identifier of the current system
Right-click in the lower left corner, in the pop-up menu. Check “Command Prompt (Administrator) (A)”.
In the pop-up command line window, type “bcdedit /enum /v” (without double quotes) and press Enter.