Windows 8 how to automatically connect to ADSL

  
when you log in. It is very troublesome to repeatedly dial the network connection every time you turn it on. So share a little trick to enable the computer to automatically connect to the network after booting.
Operating steps:
1. Under Metro or traditional desktop, press the keyboard's “Win+X” and select the hotkey to bring up the shortcut menu, and use the left mouse button to click “Computer Management (G)”. . As shown in the following figure:

2. In the pop-up computer management window, use the left mouse button to click on the left side of the "Task Scheduler" to make it selected, then click the right mouse button to pop up the menu. And select “Create Basic Tasks (B) …”. As shown in the following figure:

3. In the Create Basic Task Wizard dialog box that pops up, type the task name such as: ADSL Auto Dial, and then click Mark “2” at the next icon note “1” "Next (N)>” button. As shown in the following figure:

4. In the task trigger setting interface, select the following icon Note “1” at the current user login (L)”, then click on the label “2” At the "Next (N)>” button. As shown in the following figure:

5. In the operation setting interface, select the following icon (“1” at the startup program (T)”, then click on the label “2” Next (N)>” button. As shown in the following figure:

6. In the startup program or script setting interface, type “lddial ADSL [email protected] CNWHTHJK” at the location of the label “1”, and then mark ““2” Click the “Next (N)>” button. As shown in the following figure:

Note: ADSL is the name of the dial-up connection that has been created, which is not affected by the case. The specific needs to be modified according to the actual situation. Followed by the account and password, separated by spaces, but the account and password must be entered in strict accordance with the case
7, in the pop-up reminder dialog box, click the "Y" & rdquo; button. As shown in the following figure:

8. After completing the setting interface, check the following icon Note “1” When you click “Complete", open the dialog box for this task property. ”, then click on the "Complete(F)” button at the "2” As shown in the following figure:

9. In the pop-up property setting window, click the “Conditions” tab and uncheck “Only when the computer is using AC power (P)&rdquo ;, finally click the "OK" button to end the settings. As shown in the following figure:

10. When the setting is completed, the system will automatically dial each time the computer is restarted, provided that the network cable, modem and telephone line are connected.
Remarks:
The above mentioned broadband connection name (eg ADSL) must be the same as the name shown in the figure below, as shown in the following figure:


Copyright © Windows knowledge All Rights Reserved