Win8 blue screen failure 0x00000050 how to do Win8 blue screen failure 0x00000050 solution

Win8 blue screen failure 0x00000050 how to do? I feel that everyone has encountered a blue screen when the computer is turned on. Recently, there are Win8 system users, reflecting that their computer has a blue screen in use, and the error code 0x00000050 is prompted. What is going on? Now let's talk about Win8 blue screen failure: 0x00000050 how to solve.

The steps are as follows:

1, after investigation, the reason for this blue screen error code is:

Code: 0x00000050

Cause: The file already exists.

2, the general exception, press the F8 key to enter the selection menu, enter the safe mode to uninstall the problem to drive, delete, replace the problematic system files. You can also use the up and down keys to select the last correct configuration item, and return to perform the restart to solve the problem.

3. The same blue screen code, because of the different environments, there are various possibilities.

4 For example, an exception such as the driver wizard can cause this blue screen phenomenon. Then what to do is blue screen.

5, restart the computer will also cause the disk self-test, but the self-test D disk is automatically interrupted, and there is a driver sprite residual message. Even if you plug in the u disk, it will be blue screen. Re-recovering the C disk image will not solve the problem. Restart or self-test D disk.

6, then the carriage return to self-test, enter the operating system to defragment the D drive, after analysis, the D drive is fragmented, and then returned to normal after finishing. Through this example, you can see the blue screen error, the specific analysis of the importance of the specific situation.

7. Details can be entered in the Start→Run: EventVwr.msc, open the Event Viewer after the carriage return, pay attention to check the system log and the application log to indicate the wrong item.

8, before, be sure to click the system failure record option, otherwise the blue screen can not record blue screen events (may be optimized): Control Panel → System → Advanced → Start and Recovery → System Failed → check to write the event to the system log → OK.

9, (1) After the blue screen, find the error file with the extension dmp under the minidump folder on the system disk (usually the C drive).

(2) The extension dmp file needs to use the source code to debug WinDbg software to view (Microsoft official website can download the software).

10, (1) The log file with the extension DMP is the system file. If it is not found, you need to modify the folder option in advance.

(2) Start → Control Panel → Folder Options → View → Tap to display all files and folders → Apply.

(3) Remove the hidden front of the protected operating system files, hide the extension of the known file type → OK.