Using Win disk to install Win 8 dual system tutorial

Yesterday at noon we used nt6 to install Win8 dual system on Win7 once successfully, and gave a detailed graphic tutorial, today to fill a tutorial on using Windows to install Windows8 on Win7 There are two reasons!

first: nt6 install Win8 if you want to install the D drive, then you need to first extract the ISO to the root of the other letter, but many students hard disk is almost full, you want to install the system The D drive is also a tightly packed 20 GB space. It is difficult to extract the drive letter to another drive letter.

second: U disk tool that can completely replace the system disc, if you are from the limited space left on the hard disk of 20GB squeezed out of room to hold the Win8 experience, then nt6 way that is not suitable for installation You, we have to introduce this method to get help can help you!

U disk mounting Windows8 Consumer Preview formed Win7 conventional double system a total of two steps: Step

: U disk made of a disk system!

Step: Check the BIOS setting, the U-plate for the first start, restart the system automatically installed! As the second step

looked almost automatically installed successfully, and and "Win8 /Win7 dual system installation graphic tutorial" exactly the same, so I will not repeat here, we can go there for a while that The graphic description of the article. Here mainly talk about the process of making a U disk system disk.

Preparation: Download Simplified Chinese Win8 ISO file, download and install UltraISO software.

start making U disk system disk: Use UltraISO to open the downloaded Win8 Consumer Preview ISO file, click Start - write disk image. This time

pop up a small window, select your hard drive U disk (U disk have at least 4GB or more), write mode select USB-HDD +, click write, usually prompted to format this U disk. After the quick format is completed, continue writing, or you can click on the format and then write. Here, you must pay attention to the hard disk drive. Don't accidentally select the hard disk, you will cry without tears!

after programming will remind you write is successful, the process based on your disk read and write speed U, are generally U disk was about a 10-minute appearance. After the successful writing, this U disk in your hand is the Win8 system disk!

next step is to go in to check your bios boot entry, set the U disk as the first boot entry, because the computer biOS different, can not be listed here, Asus notebook boot Press The ESC key can choose the startup item (may not be the same for all Asus), it seems very convenient! After the setup is complete, restart the computer and plug in the USB flash drive!

from the U disk boot you will see the Beta fish, followed by select language, input method, etc., we downloaded all the Simplified Chinese version, so do not set here, continue to the next step ......
< BR> At this time, I will connect with the fourth step of this tutorial at http://Win8e.com/jiqiao/3447.Html! Remember to record the DNJXJ-7XBW8-2378T-X22TX-BKG7J key in advance, it will be used during installation!

from step to step twenty-fourth Each installation method is almost the same, the process of installing the system is the core of this. I will not turn the picture over here to do the repetitive work! I wish you all a good time to install Win8! Have fun and have fun! After the installation is complete boot time

first beta fish, then it is very gorgeous boot selection screen!