Win8 installed in the U disk has to know the program

1, Win8 system image

2, Windows To Go auxiliary software multi-thread optimization special edition

(the above documents, will be provided at the end)

Okay Let's start! First we must first extract the install.wim of the sources folder in the win8 image. You can use WinRAR to extract the simple and convenient.

Then plug in our U disk (or mobile hard disk), use the system's own disk management to set the U disk to "active area", this step is very important, if not set, it may cause the U disk to boot Can't guide the system! Right click on the mobile drive letter and set it to “activity"!!

Open Windows To Go auxiliary software (win7 users please run with "administrator rights"), select just unzipped Install.wim file, "check the installed disk", this, select your own U disk or mobile hard disk, here you need to pay attention to, the storage device must be greater than 20G space! Otherwise there will be tips drop! Storage The device is still recommended for the USB3.0 specification.

Less than 20G will be prompted!

After you have selected, click to start the installation! Fully automatic, no manual intervention. After the start, the software will automatically format the memory, so what information is still backed up in advance. Then pop up a CMD command line ~ there will be a progress bar and time estimate, please wait a moment!

It is strongly recommended to use the multi-threaded optimization version recommended in this article, which will reduce the installation time of this step, 3.0 The installation time of the device install.wim is about 20 minutes! Please be patient, don't close the command line window!

After everything is installed, the CMD command line will disappear automatically. We will close the software, restart the computer, and enter Bios sets the startup item. The motherboard of each computer is different. You can check the instructions on your motherboard for modification.

Let's take my Lenovo desktop as an example. After rebooting, click the DEL button to enter the Bios settings.

According to the figure, select the second item on the left.

Next select Boot Device

1st Boot Device item selection, Removable Dev

You can enter Removable Dev to confirm whether the motherboard can be recognized!

After the setting is completed, save and exit, you can see Win8 after rebooting!

The step of installing win8 to the USB flash drive is over, and the system is installed on the USB flash drive (or the mobile hard disk can also be used) Carry it with you, go where you plug in the USB flash drive, and get everything done! Don't worry about the synchronization of files, don't worry about personal habits, don't worry about security issues, everything is as simple as that!