How to set up the wireless network connection in Windows 8 system

First step, first click the network icon in the tray, check whether the flight mode is enabled in the right side of the pop-up network, if it is turned on, you need to close it. Then find the private wireless network SSID (Wireless Webcast Name) in Wi-Fi and click “Connect”.

The second step, then enter the security key of the private wireless network in the white box. If you feel that the input is wrong, you can click the eye icon on the right to view the input, and click after confirming the error. “Next step”.

The third step, if the network security key is entered correctly, the computer can already connect to the Internet through the wireless network, and you can start using it. Of course, there is one final step in wireless network connectivity, whether to enable sharing between computers and connect to devices on this network. In general, if two or more computers are connected to the wireless network and need to share files, printers, etc., click the second item. Yes, enable sharing and connect to the device for home or work network. & rdquo;, otherwise click on the first item "No, do not enable sharing or connect to the device for the public network". Figure:

The fourth step, advanced use: in the already connected network, right click can set “ show /hide the expected data usage rdquo;, & ldquo; set by traffic /no Connect by flow meter ", “forget this network",“ enable or disable sharing",“View connection properties”, as shown in the figure:

Step 5, Show or Hide Estimated data usage, showing or hiding the time and cost of traffic from the very beginning of the network. Click “Reset" to reset the count to 0. Set to a per-flow or non-flow-based connection that allows Windows 8 to determine whether to automatically start Windows updates and download updated hardware drivers from the network.

Step 6, forget this network, you can let Windows 8 forget the password, sharing settings and other information of this connection, which is equivalent to " never connected to this network". Enabling or disabling sharing is the same as the third step of connecting to a wireless network, where manual modifications can be made. Check the connection properties, here you can modify the wireless network password and encryption method, as well as some settings when the wireless network is connected.

Through the above six steps, you can achieve wireless network connection in Windows 8 system!

Note: Please pay attention to the computer tutorial section, computer office group: 189034526 welcome you to join