Win8 UEFI mode installation ubuntu13.04 installation tutorial

I believe that many webmasters are the gods who integrate product, development and art. When it comes to development, I have to say Lamp. I recently installed ubuntu for my customers with Taian Luther Engineering Materials Co., Ltd. I haven't thought about copying and reprinting the old version on the Internet, so I personally tried to install it and share it with everyone. The content is original and reproduced.

Declare: A lot of online tutorials on win8+ubuntu13.04 have been added to the ubuntu boot entry (easybcd setup boot, etc.), I looked at it and practiced it myself and found that they are mostly based on the traditional boot. Not UEFI mode. I believe that the reason why you saw this article is that you may see all kinds of copying and reprinting of Baidu on the same page, but you can't find the answer. Don't be depressed. After all, the national conditions are like this. Why don't you google it? Today, I will share with you the installation of ubuntu13.04 or ubuntu13.10 in window 8 UEFI mode; I personally try, regardless of installing win8 in the installation of ubuntu13.04 or first install ubuntu13.04 in the installation of win8 only after the installation of the system Startup, if you want to have a dual system selection menu at boot or reboot, then this tutorial is for you. Not much nonsense, the tutorial

Step 1: Confirm whether your machine supports uefi mode. Generally, after 2010, the machine will have uefi mode, or enter the BIOS to check if there is a uefi setting option in the boot option. If it is enabled (if you have installed win8 and it is legacy boot traditional boot mode, this tutorial may not be suitable) You.)

Step 2: Make sure the hard disk partition table mode is gpt. If it is not this mode, you may need to format the hard disk and change the partition table mode to gpt (the entire hard disk data will be lost, pay attention to backup )

If your machine is already installed with win8 based on uefi mode (buy pre-installed win8 new machine is to meet the above two steps) then do not need to perform the first two steps, please see the third step

Step 3: Burn or make a U disk installation disk, UEFI mode installation system, please download the 64-bit ubuntu U disk production tutorial. See the copylife user-written tutorial http://www.ubuntukylin.com/ukylin /forum.php?mod=viewthread&tid=161&extra=page%3D1

Step 4: Install Ubuntu13.04 Put the U disk or CD into the machine, restart and select the boot item as CD or U disk Enter ubuntu startup selection Select can be installed directly, before selecting a few very simple installation, looking at their own choice.

Note the following:

1: Install other options (for coexistence with win8) Next

2: Disk selection (the following picture is found from the Internet, then I Ps a bit, you do not have to have a one-to-one correspondence on the inside)

You will See a uefi type partition (do not have to look at sda + number, different disks are different, usually 2 or 3) The size of the partition is generally about 100M, click change to select the UEFI boot area, select a larger partition, at least 10G click first “-” (under the minus sign in the lower left corner) delete the partition, so in order to create a new partition suitable for ubuntu, then select the deletion just now, click “+” (plus sign in the lower left corner), create a new one for ubuntu Partition

The size itself is determined, but at least 2G~4G of free space is left for exchange, click OK, then select the remaining partition just deleted again. Partially, mount point swap space

Install Moving guide the default, if you not intend to modify this, we select labeled /dev /sda (without any number that represents the entire disk) can be.

Then follow the prompts to install it, the back is very simple

If you install ubuntu13.04 after rebooting, you can enter ubuntu13.04 but there is no win8 startup item, the following is the key point Oh

If your English is good enough, you can refer directly to https://help.ubuntu.com/community/UEFI

If your English is the same as me, there is no level 8, then let's together Learn about it

Method 1: USB-installed Boot-Repair

Step 1: Download Boot-Repair and create a USB flash drive to install the boot disk. Download address:

Step: Insert the USB flash drive into the computer, restart to select the USB flash drive, select Chinese to enter the Boot-Repair interface.

Step 3: Start Boot-Repair click on "Advanced options", go to in the boot menu The "GRUB location" tab. Click the advanced option, select the GRUB location section

(In fact, I chose the Recommended repair to fix the startup item, everyone You can try this first, then see if it succeeds, no Successfully use the advanced option) in the GRUB location column, select the UEFI boot partition that was selected when the ubuntu partition was just installed (the software will automatically select the fold, if not selected, select it yourself) Click on the application

After the process is restarted, there is a dual system menu. This process may be troublesome, but it is safe. By the way, promote the personal website, http://www.tarende.com geogrid, steel geotechnical Grille I just tried to install ubuntu for this website just to learn how to use Linux Apache+php+mysql. I hope everyone will give you an encouragement, thank you, for reference: https://help.ubuntu.com/community/UEFI English