Win8 shared wireless network settings graphic tutorial

        This tutorial teaches you how to set up Win8 wireless sharing. Let two or more notebooks pass through the network cable of one of the notebooks (can also use wireless), wireless Internet access, the realization principle is to set up a wireless coverage hotspot by setting up a virtual AP with the built-in wireless network card of the notebook. Method one, you don't need any software, you only need to set up your computer. It is recommended for people who like tossing. Win8 shared wireless network settings graphic tutorial Prerequisites:
1, the system is WIN8 Internet access computer
2, wireless network card support bearer network (preferably updated to the latest wireless network card driver), it is recommended to download the driver wizard automatically Update to the highest version.





































, sharing network connections.
1. How to see if your network card does not support the bearer network? Run CMD in administrator mode. Enter the command line netsh wlan show drive. If the support is displayed as Yes.
2. Set up the bearer network input netsh wlan set hostednetwork mode =allow ssid=the name you want to use (such as hjq) key=the password you want to use (such as huangjianqiang seems password at least 8 or 13) prompt to bear Successful network setup
3. At this time, you can see more than one virtual network card in the change adapter settings of the network and sharing center. Wireless network connection 2” Microsoft Virtual WiFi Miniport Adapter.
Select the share in the NIC properties, select the wireless network connection 2 from the drop-down menu, and then select Share, and both checkmarks are clicked.
4. Open the wireless network card to enter the command line
netsh wlan start hostednetwork Start the bearer network
5. Start scanning wifi with other computers or mobile phones, log in with the password you set
6. Each time the site is booted, it will not start automatically. It must be started manually. As mentioned above, run netsh wlan start hostednetwork again as an administrator at the command prompt. However, the solution I took was to create a batch file and use Notepad to enter the following: netsh wlan start hostednetwork, save as "open virtual base station.bat";
Tip: This command only has administrator privileges to run normally, so After you open the wireless network card, right click “run as administrator”. The tutorial is here~ can be connected to the wireless network, this tutorial comes from the network, the computer Pepsi network editor has not verified, interested friends can try it, if you are Win7 system implementation method can refer to the authoritative tutorial: Win7 notebook to do wifi hotspot Win7 notebook how to be a wireless router.