How to create a virtual network card in the Win8 system

win8 virtual network card creation method and win7 create a virtual network card operation mode is somewhat different, then how to create a virtual network card in Win8 system? Download the small series to share in the following The method of creating a virtual network card in Win8 system, I hope to help everyone.

Creating a virtual network card method in Win8 system

First enter Win8 system and press the shortcut key win+x to open the device manager, as shown below

After adding, in the network You can see this virtual network card only after connecting.

Otherwise, the virtual network card cannot be seen. If the virtual network card is not added, the bearer network cannot be started. When you use the command, you will be prompted with the following error.

Once the addition is successful, you can start the hosting network.

The following IP settings are done automatically by the system and do not need to be manually. If it does not automatically set the IP address, it can also be set manually. However, devices connected to this wireless network will not be able to obtain an IP address automatically. Also need to fill in manually. At that time, the gateway has to fill in the IP address set by itself.

Ok, here is the operation of adding a virtual network card under the Win8 system.